744943
43
Zoom out
Zoom in
Previous page
1/52
Next page
43 GB
IntroductionIntroduction
6
Rechargeable battery pack
7
Battery pack release button
8
LED light button
9
LED light
10
Rechargeable battery display LED
11
Rechargeable battery charge state button
12
LED working light
13
Drill chuck
14
Torque pre-selector
15
Fast charger
16
Red charge-control LED
17
Green charge-control LED
Q
Scope of delivery
1 Cordless drill with rechargeable battery pack
1 Bit PH2 50 mm
1 Fast charger
1 Carry case
1 Directions for use
Q
Technical Data
PABS 18-Li B2 Cordless drill:
Nominal voltage: 18 V
Idle-running speed: 1st gear: max. 400 min
-1
Idle-running speed: 2nd gear: max. 1400 min
-1
Drill chuck
clamping range: max. 10 mm
Maximum
drill diameter: Steel: 10 mm,
Wood: 30 mm
Max. torque: 35 Nm
PABS 18-Li B2-1 Battery Pack:
Type: LITHIUM-ION
Nominal voltage: 18 V
Capacity: 1.5 Ah
Energy content: 27 Wh
PABS 18-Li B2-2 Fast Charger:
INPUT
Nominal voltage: 230 V∼, 50 Hz
Power input: 55 W
OUTPUT
Nominal voltage: 18 V
Charging current 2 A
Charging time: approx. 60 min
Protection class: II /
Noise and vibration data:
Measured values for noise are determined in accor-
dance with EN 60745. The A-weighted noise level
of the electrical power tool are typically:
Sound pressure level: 76 dB(A)
Sound power level: 87 dB(A)
Uncertainty K: 3 dB
Total vibration (vector sum of three directions) is
calculated in accordance with EN 60745:
Screwing: Vibration emission value
a
h,D
= 0.865 m / s
2
,
uncertainty K = 1.5 m / s
2
,
Drilling: Vibration emission value
a
h
= 2.546 m / s
2
,
uncertainty K = 1.5 m / s
2
.
The vibration level specified in
these instructions was measured in accordance with
an EN 60745 standardised measurement process
and can be used to compare equipment. The vibra-
tion emission value specified can also serve as a
preliminary assessment of the exposure.
The vibration level will change according to the ap-
plication of the electrical tool an in some cases may
exceed the value specified in these instructions. Re-
gularly using the electric tool in such a way may
make it easy to underestimate the vibration.
Note: If you wish to make an accurate assessment
of the vibration loads experienced during a particular
period of working, you should also take into account
the intervening periods of time when the device is
switched off or is running but is not actually in use.
This can result in a much lower vibration load over
the whole of the period of working.
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 75636 PABS 18 Li B2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 75636 PABS 18 Li B2 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info