Manual Parkside IAN 74767 PDWS 8 A1 (page 27 of 31) (English, German, Dutch, French)

745070

Zoom out

Zoom in

1/31

31 GB

Introduction / General safety instructions for air tools

Sound pressure level: 73 dB(A)

Sound power level: 85 dB(A)

General safety

instructions for air tools

Note: The terms „compressed air device“ or „de-

vice“ employed in the following text relate to the

compressed air devices deﬁned in the operating

manual.

Basic safety measures must be

followed when using compressed air devices air

tools to eliminate the risk of ﬁre, electric shock and

personal injury. Be sure to read and follow the no-

tices within these operating instructions prior to us-

ing the device and store them in a safe location. The

manufacturer assumes no liability for damages or

personal injury resulting from failure to follow these

operating instructions.

Children or persons who lack the knowledge or

experience to use the device or whose physical,

sensory or intellectual capacities are limited

must

never be allowed to use the device without su-

pervision or instruction by a person responsible

for their safety.

Do not allow children to play with the device.

RISK OF INJURY! Disconnect

the compressed air supply prior to any form of

maintenance work.

EXPLOSION

HAZARD! Never use petrol or

other ﬂammable liquids to clean the

air tool! Sparks could ignite residual vapours

inside the compressed air device resulting in

the compressed air device exploding. Do not

use the device in explosive environments with

ﬂammable liquids, gasses or dust. Never work

on materials which are or could potentially be

highly ﬂammable or explosive.

Only use the device in areas of application for

which it was designed!

Do not overburden the device.

Never use hydrogen, oxygen, car-

bon dioxide or other bottled gasses

to power this tool as doing so may

result in explosion, thus severe injuries.

Service and clean the device as described

above on a regular basis. (see Chapter „Clean-

ing and care“).

Check the device for damage before bringing

it into use. Always make sure that the device is

in perfect condition each time before use.

Remain alert at all times and always watch

what you are doing. Unanticipated movement

of the device could cause hazards.

Avoid placing your body in an unnatural posi-

tion. Keep proper footing and balance at all

times. By doing this you will be in a better posi-

tion to control the device in unforeseen circum-

stances.

Do not use an electrical device if its switch is

defective. An electrical power tool that can no

longer be switched on and oﬀ is dangerous

and must be repaired.

Store the device out of the reach of children

when you are not using it. Do not let anyone

use the device if he or she is not familiar with it

or has not read the instructions and advice.

Compressed air tools are dangerous when they

are used by inexperienced people.

Look after the device carefully. Check that mov-

ing parts are working properly and move freely.

Check for any parts that are broken or damaged

enough to detrimentally aﬀect the functioning

of the device. Have damaged parts repaired

before you use the device. Many accidents have

their origins in poorly maintained electrical

power tools.

Switch the device oﬀ if you do not use it any

more.

Always wear personal protective

device and safety glasses. Wearing

personal protective device such as

dust mask, non-slip safety shoes, safety helmet or

ear protectors, depending on the type of air tool

and its application, reduces the risk of injuries.

Check the connections and supply lines. All

maintenance units, couplings and hoses must

be designed in accordance with the character-

istic values of the device in relation to pressure

and air ﬂow. Pressure that is too low will impede

the functioning of the device, pressure that is too

high can lead to material damage or injury.

Introduction

74767_par_Druckluft Wasserstrahler PDWS 8 A1_Content_LB2.indd 31 16.05.12 15:54

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 74767 PDWS 8 A1 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 74767 PDWS 8 A1 Manual

Product: