Manual Parkside IAN 73867 PGG 15 A1 (page 63 of 68) (English, German, Dutch, French)

744958

Zoom out

Zoom in

1/68

63 GB

OperationGeneral safety advice for electrical power tools / Operation

Note: Take care when increasing the penetration depth that you do

not turn the stroke switch

too far in the + direction. Otherwise the

switch could screw oﬀ the device.

Changing the engraving point

RISK OF INJURY! Switch the device oﬀ before

performing any tasks on the device and pull the mains plug out of the

mains socket.

Replace the engraving point

as soon as it becomes too worn

and no longer provides the desired engraving performance. Turn

the engraving point holder

anticlockwise until the engraving

point

is released.

Remove the spring and the plain washer.

Push the plain washer and spring on to a new engraving point

Then insert this and turn the engraving point holder

clockwise

to lock the engraving point in position.

Ensure that the engraving point

is properly ﬁxed in position.

Advice on use

You can use the mini-engraver to produce creative, individual engravings.

For example, you can use it to place identifying marks on your valuables.

You can place numbers and letters on metal, glass, plastic, wood,

ceramic and stone. This is done with the help of the supplied engraving

stencils

, see Figs. A and B.

Hold the device at an angle, as you would a pencil.

Your arm should rest on the table.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 73867 PGG 15 A1 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 73867 PGG 15 A1 Manual

Product: