745068

Parkside IAN 73790 PDMH 4500 A2 Manual

42
Zoom out
Zoom in
Previous page
1/50
Next page
GB
- 42 -
2.9 Dangers due to vibrations
•
Vibrations can injure the nerves and cause
blood circulation disorders in your hands and
arms.
•
Wear warm clothing when you work in cold
surroundings. Keep your hands warm and
dry.
•
Stop using the equipment if you experience
numbness, tingling, pain or whitening of the
skin on your fingers or hands, and consult a
doctor.
•
Do not hold the plug-in tool with your free
hand as this will lead to a higher vibration
load.
•
Hold the equipment with a light but secure
grip, noting the reaction forces which arise in
the process. The risk of disorders caused by
vibrations is always greater with a tight grip.
2.10 Additional safety information for
pneumatic machines
•
Compressed air can cause serious injuries.
•
Disconnect the compressed air coupling and
depressurize the equipment before you ser-
vice, repair or transport the equipment and
before you change the chisel.
•
Never direct compressed air at yourself or at
any other persons.
•
Whipping hoses may cause serious injuries.
You must always make sure therefore that the
hoses and their fasteners are undamaged and
have not become disconnected.
•
When you release the quick-lock coupling,
hold the hose securely in your hand and ne-
ver use defective connectors. This will help to
prevent injuries caused by a whipping com-
pressed air hose.
•
Do not let cold air flow over your hands.
•
Do not use any quick-lock couplings at the air
inlet. Use hose connections with a hardened
steel thread (or a material with comparable
resistance to vibrations).
•
If universal rotary couplings (claw couplings)
are used, lock pins must be installed and a re-
tention system for compressed air hoses used
in order to protect against possible faulty con-
nections („hose to tool“ or „hose to hose“).
•
Do not exceed the maximum permissible ope-
rating pressure.
•
Do not carry compressed air tools by their
hoses.
Keep this safety information in a safe
place.
3. Layout and items supplied
3.1 Layout (Fig. 1/2)
1. Cylinder
2. Trigger lever
3. Air regulation screw
4. Nipple
5. Tensioning spring
6. Flat chisel (universal chisel)
7. Pointed chisel
8. Rivet parting chisel
9. Parting chisel (sheet-metal chisel)
10. Spot-weld parting chisel
11. Special compressed air oil
3.2 Items supplied
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Important!
The equipment and packaging material
are not toys. Do not let children play with
plastic bags, foils or small parts. There is
a danger of swallowing or suffocating!
•
Air chisel hammer
•
Nipple
•
Tensioning spring
•
Chisel set (5 chisels)
•
Special compressed air oil
•
Original operating instructions
Anleitung_4139031_LB2.indb 42Anleitung_4139031_LB2.indb 42 03.04.12 10:1403.04.12 10:14
… 42 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 73790 PDMH 4500 A2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 73790 PDMH 4500 A2 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info