Manual Parkside IAN 73786 PDSS 310 A1 (page 51 of 59) (English, German, Dutch, French)

745066

Zoom out

Zoom in

1/59

51 GB

Safety instructions for air tools

in your hand or pressing it against your body

will not allow for safe use of the equipment.

ATTENTION! An undersized com-

pressed air system may reduce the

eﬃciency of your equipment.

Risks due to projecting parts

If the work piece, one of the accessories or the

tool itself breaks, parts may be projected at

great speeds.

Always wear impact-resistant eye protection

when using the machine for screw connections.

The level of protection required should be asses

for each individual application.

Be sure the work piece is properly secured.

Risks from gripping / winding

Risks from gripping / winding may result in suf-

focation, scalping and / or cuts if loose clothing,

jewellery, necklaces, hair or gloves are not kept

away from the machine and its accessories.

Gloves may become tangled in the rotating

drive, which may result in injuries or fractures in

ﬁngers.

Rotating drives and extensions may easily catch /

wind rubberised or metal reinforced gloves.

Never wear loose gloves or gloves with cut or

worn ﬁngers.

Never hold on to the drive, collect or the drive

extension.

Keep hands away from the rotating drive.

Operating hazards

When using the machine the operator‘s hands

may be exposed to crushing, impact, cut, abra-

sion and heat hazards. Wear suitable gloves

to protect hands.

The operator and maintenance personnel must

be physically capable to manage the weight

and power of the machine.

Hold the machine correct: be prepared to

counteract typical or sudden movements – keep

both hands ready.

Be sure your body is well balanced and

maintain a solid stance.

If tools are required to absorb the reaction tor-

que, use a suspension attachment whenever

possible. If this is not possible, we recommend

side handles for machines with straight handle

and pistol grip. At any rate we recommend

using tools to absorb if it is greater than 4 Nm

for machines with straight handles, greater

than 10 Nm for machines with pistol grip and

greater than 60 Nm for oﬀset screwdrivers.

In the event of power failure release the start-

or stop control.

Only use the lubricants recommended by the

manufacturer.

Hex nut drivers with open ﬂathead can crush

ﬁngers.

Do not use the tool in tight spaces and be sure

your hands are not crushed between the machine

and work piece, especially when unscrewing.

Hazards due to repetitive

motions

When using a machine for screw connections

the operator may experience discomfort in

hands, arms, shoulders, neck or other body

parts whilst performing work-related tasks.

Maintain a comfortable position whilst using

this tool, be mindful of a secure grip and avoid

awkward positions or positions making it diﬃ-

cult to maintain your balance. The operator

should

change his posture during extended periods of

use, which may help to prevent discomfort and

fatigue.

If the operator experiences symptoms such as

persistent malaise, discomfort, palpitations, pain,

tingling, numbness, a burning sensation or stiﬀ-

ness, these warning signs should not be ignored.

The user should (if applicable report these to

the employer and) consult a qualiﬁed health-

care professional.

Safety instructions for air tools

73786_par_Druckluft-Schlagschrauber PDSS 310 A1_content_LB2.indd 51 30.05.12 17:00

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 73786 PDSS 310 A1 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,13 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 73786 PDSS 310 A1 Manual

Product: