Manual Parkside IAN 73384 PABH 18 LI A1 (page 64 of 74) (English, German, Dutch, French)

745081

Zoom out

Zoom in

1/74

- 64 -

If the battery pack still fails to charge, send

•

the charger and charging adapter

•

and the battery pack

to our customer service center.

To ensure that the LI battery pack provides long

service you should take care to recharge it

promptly. You must recharge the battery pack

when you notice that the power of the cordless

hammer drill drops.

7.2. Inserting a tool (Fig. 4)

Important. Set the changeover switch (7) to its

center position whenever you carry out any work

(for example changing the tool, maintenance

work, etc.) on the equipment.

•

Clean the tool before fitting it and apply a thin

coating of bit grease to the tool shaft.

•

Turn and push the dust-free tool into the tool

chuck (1) as far as it will go. The tool will lock

automatically.

•

Check that the bit is locked in placed by

pulling on it.

7.3. Removing a tool (Fig. 5)

Pull back and hold the locking sleeve (2) and

remove the tool.

7.4 Screw/Drill/Hammer drill selector

switch (Fig. 6/Item 3)

Change the switch position only when the

equipment is at a standstill!

Drilling/screwdriving:

For drilling/screwdriving, press the button (C) on

the selector switch (3) and simultaneously turn the

selector switch (3) to position A.

Hammer drilling:

For hammer drilling, press the button (C) on the

selector switch (3) and simultaneously turn the

selector switch (3) to position B.

Important.

The 2nd gear must be selected for hammer dril-

ling. See point 7.7 Selecting the gear.

Important.

You only require slight contact pressure for ham-

mer drilling. Excessive contact pressure will place

unnecessary strain on the motor. Check drill bits

at regular intervals. Sharpen or replace blunt drill

bits.

7.5 Changeover switch (Fig. 7/Item 7)

Using the slide switch above the On/Off switch

you can select the direction of rotation of the

equipment and lock the equipment so that it can-

not be switched on accidentally. You can select

between clockwise and counter-clockwise rotati-

on. To avoid causing damage to the gearing, the

direction of rotation must only be changed when

the equipment is at a standstill. When the slide

switch is in the middle position, the On/Off switch

is blocked.

Important.

To avoid danger, the machine must only

be held using the two handles (9).

Otherwise you may suffer an electric shock if you

drill into electric cables!

7.6 On/Off switch (Fig. 7/Item 8)

Inﬁ nitely variable speed control is possible with

the On/Off switch. The further you push the

switch, the higher the speed of the equipment.

7.7 Selecting the gear (Fig. 8/Item 4)

The gear selector switch (4) enables you to work

within a speciﬁ c speed range.

Switch position setting 1

Speed range: High torque, low speed

Switch position setting 2

Speed range: Low torque, high speed

7.8 LED indicator for counter-clockwise/

clockwise (Fig. 8/Item 5)

The LED display for counter-clockwise/clockwise

(5) indicates the position of the changeover switch

(7).

Blue LED is lit: Clockwise

Red LED is lit: Counter-clockwise

Anl_4513631.indb 64Anl_4513631.indb 64 08.02.13 08:1908.02.13 08:19

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 73384 PABH 18 LI A1 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 73384 PABH 18 LI A1 Manual

Product: