Manual Parkside IAN 64574 PDSP 1000 A1 (page 47 of 65) (English, Portuguese, Spanish)

744932

Zoom out

Zoom in

1/65

47 GB/MT

Operation

Filling the blast medium container

J Always use a suitable blast medium for your sand blasting work.

NOTE: We recommend using a silica-free blast medium

(e.g. ground blast furnace slag) with a grading of 0.2 mm – 0.8 mm.

j Ensure that the blast medium is completely dry and not too coarse.

NOTE: The maximum particle size is 0.8 mm.

j Turn the bayonet cap of the blast medium container

to open it.

j Pull the blast medium container

oﬀ downwards.

j Fill the blast medium container

with the desired amount of

blast medium.

j Ensure that the maximum capacity of the container (1000 ml) is

not exceeded.

j Screw the blast medium container

back on and lock it in place

by inserting and turning it on to the container lid (see Figs. A).

Using the sandblasting gun

(see Figs. B, C)

j Carefully prepare the workpiece before sand blasting it.

Clean it if necessary.

NOTE: Deposits of dust and grease can have a considerably

detrimental eﬀect on the result.

j Carefully mask or tape oﬀ everything that is not to be sand blasted.

j Ensure that there is always a minimum distance of 20 cm between

the sandblasting gun

and the surface being sand blasted.

Switching on:

j Press the trigger

to start operating the sandblasting gun

64574_par_Druckluft-Sandstrahlpistole_content_LB5.indd 47 17.03.11 13:49

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 64574 PDSP 1000 A1 in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 2,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside IAN 64574 PDSP 1000 A1

Parkside IAN 64574 PDSP 1000 A1 User Manual - German, Dutch, French, Italian - 52 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 64574 PDSP 1000 A1 Manual

Product: