745073
40
Zoom out
Zoom in
Previous page
1/52
Next page
40 GB/MT
Q
Before use
Q
Mounting / replacing
saw blades
WARNING!
Pull the mains plug out of the
mains socket before you carry out any task on the
device. Failure to observe this advice may lead to
injury.
j Turn the quick-release chuck
7
and hold it in
the turned position.
j Press the selected saw blade up to the stop
into the quick-release chuck
7
. The saw blade
should engage.
j Release the quick-release chuck
7
. The chuck
must then return to its original position. The saw
blade is now locked in place.
Q
Rotating the hand grip
WARNING!
DANGER OF INJURY! Pull
the mains plug out of the socket before you carry
out any task on the device, The hand grip
4
can
be rotated by 90° to the right or left. This allows
the ON / OFF switch
3
to be brought into the most
comfortable position for any working conditions.
j Press the unlocking button
10
and rotate the
hand grip
4
to the right or left.
j Make sure the hand grip
4
engages.
Q
Adjusting the shoe
WARNING!
DANGER OF INJURY! Pull
the mains plug out of the socket before you carry
out any task on the device,
j Adjust the shoe
5
to suit the cutting depth.
j To do this release the shoe adjustment lever
8
and place the shoe
5
in appropriate position.
j Lock the shoe in this position by pulling the
shoe adjustment lever
8
tight.
Q
Setting the blade speed
The desired blade oscillation speed can be prese-
lected by using the setting wheel
1
(MIN. = lowest
oscillation speed, MAX. = highest oscillation speed).
The blade speed can also be selected whilst you
are using the device.
Q
Preparing for use
Q
Switching on and off
When operating the device you can select between
intermittent or continuous operation mode.
To switch on intermittent operation mode:
j Press the ON / OFF switch
3
.
To switch off intermittent operation mode:
j Release the ON / OFF switch
3
.
To switch on continuous operation mode:
j Press the ON / OFF switch
3
and fix it in the
pressed position with the lock button
2
.
To switch off continuous operation mode:
j Press the ON / OFF switch
3
and release it
again.
Q
Guiding the sabre saw
safely and accurately
The shoe
5
pivots to adjust to the workpiece and
provides safe support to the device. It must always
lie against the workpiece when the device is in use.
Q
Advice about ways of
working when sawing
J Before sawing, check the workpiece for foreign
bodies such as nails, screws etc. and remove
them.
Before use / Preparing for use
61099_par_SAEBELSAEGE_Content_LB5.indd 40 03.12.10 14:27
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 61099 PFS 710 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 61099 PFS 710 A1 in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 3,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside IAN 61099 PFS 710 A1

Parkside IAN 61099 PFS 710 A1 User Manual - German, Dutch, French, Italian - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info