Manual Parkside IAN 56847 PFS 280 A1 (page 38 of 52) (English, Portuguese, Spanish)

744940

Zoom out

Zoom in

1/52

38 GB/MT

When working outdoors with an

electrical power tool always use ex-

tension cables that are also approved

for use outdoors. The use of an extension

cable suitable for outdoor use reduces the risk

of electric shock.

Use a residual current device (RCD)

for protection if operating the electri-

cal power tool in a moist environment

is unavoidable. The use of an RCD reduces

the risk of electric shock.

3. Personal safety

Wear personal protective

equipment and always wear

safety glasses. The wearing of

personal protective equipment such as dust

masks, non-slip safety shoes, safety helmets or

ear protectors, appropriate to the type of elec-

trical power tool used and work undertaken,

reduces the risk of injury.

Careful handling and use

of electrical power tools

Do not use an electrical power tool if

its switch is defective. An electrical power

tool that can no longer be switched on and oﬀ

is dangerous and must be repaired.

When not in use always ensure that

electrical power tools are kept out of

reach of children. Do not let anyone use

the device if he or she is not familiar

with it or has not read the instructions

and advice. Electrical power tools are danger-

ous when they are used by inexperienced peo

ple.

Use the electrical power tool, accesso-

ries, inserted tools etc. in accordance

with these instructions and advice, and

the stipulations drawn up for this par-

ticular type of device. In doing this, take

into account the working conditions

and the task in hand. The use of electrical

power tools for purposes other than those in-

tended can lead to dangerous situations.

Safety instructions for

ﬁne spray systems

Keep your work area clean, well lit

and free of paint or solvent containers,

rags and other combustible materials.

Potential danger of spontaneous com-

bustion. Keep fully functioning ﬁre extinguish-

ers / extin-guishing equipment available at all times.

Ensure good ventilation in the spray-

ing area and sufficient quantities of

fresh air through-out the room. Evapo-

rating ﬂammable solvents create an explosive

environment.

The spray gun must never be used for

spraying inflammable substances.

Spray guns must never be cleaned

using inflammable solvents.

Do not spray or clean with materials

with a flashpoint below 21°C. Use

materials on the basis of water, low-

volatile hydrocarbons or similar ma-

terials. Highly volatile evaporating solvents

create an explosive environment.

Do not spray in the area of ignition

sources such as static electricity sparks,

open flames, pilot lights, hot objects,

motors, cigarettes and sparks from in-

serting and disconnecting power cords

or the operation of switches. Such

sources

of sparks can lead to ignition of the surround-

ing area.

Do not spray any materials for which

it is not known whether they pose a

danger. Unknown materials can create dan-

gerous conditions.

Wear additional personal

protective equipment such as

appropriate protective gloves

and protective masks or respirators

when spraying or handling chemicals.

The wearing of protective equipment in such con-

ditions reduces exposure to harmful substances.

Do not spray on yourself, other people

or animals. Keep hands and other body

parts away from the spray jet. If the

spray penetrates the skin, seek medi-

cal help immediately. The material being

General safety advice for electrical power tools / Before useGeneral safety advice for electrical power tools

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 56847 PFS 280 A1 in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 1,92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside IAN 56847 PFS 280 A1

Parkside IAN 56847 PFS 280 A1 User Manual - German, Dutch, French, Italian - 44 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 56847 PFS 280 A1 Manual

Product: