Manual Parkside IAN 315808 PHS 9500 A1 (page 25 of 100) (English, German, Dutch, French, Polish)

749330

Zoom out

Zoom in

1/100

21GB/IE

■The operator is resposnible to third persons

within the area of operations.

■Keep children away.

■Do not allow other persons, especially children,

to touch the tool or motor. Keep them away from your

working area.

■Always ensure that the hedge trimmer is prop-

erly in one of the prescribed working positions

before starting the motor.

■Ensure that all handles and safety equipment

are installed when using the hedge trimmer. Nev-

er attempt to use an incomplete hedge trimmer or one with

an impermissible modiﬁcation.

■Do not use a blunt, broken or otherwise dam-

aged cutting device.

■Be sure that the cutting device already moves be-

fore you start cutting.

■Do not overload the machine! You work better and

safer in the given performance range.

■Only operate the machine with complete and

correctly attached safety equipment and do not

alter anything on the machine that could impair

the safety.

■Do not modify the device or parts of the device

respectively.

■Do not use any knives which do not comply with

the indicated characteristics of this instruction

manual. The use of other tools and other accessories can

signify a risk of injury for you.

■Stop the machine and remove the spark plug

connector from the spark plug when

- the hedge trimmer had contact with soil, stones, nails or

other foreign substances checking the device for damages

- Adjusting the working position of the cutting unit

- Inspection, maintenance or work on the hedge trimmer.

- carrying out repair works

- maintenance and cleaning

- carrying out servicing and repair works, removal of faults

(including blocking of knives)

- transport and storage

- leaving the hedge trimmer (also for short-term interrup-

tions)

■Maintain your hedge trimmer with care:

- Keep your tools sharp and clean in order to be able to

work better and safer.

- Keep handles dry and free of oil and grease.

- Follow the maintenance instructions.

■Check the machine for possible damage:

- Before continuing to use the machine, the protective de-

vices must be inspected to ensure that they work perfectly

and with their intended function.

- Check whether the movable parts function perfectly and

do not stick or whether the parts are damaged. All parts

must be correctly installed and fulﬁl all conditions to en-

sure perfect operation of the hedge trimmer.

- Damaged guards and parts must be properly repaired or

exchanged by a recognized, specialist workshop; insofar

as nothing else is stated in the instructions for use.

- Damaged or illegible safety labels should be replaced

immediately.

■Do not allow any tool key to be plugged in! Be-

fore switching on, check always that wrenches and adjusting

tools are removed. Before switching on, check always that

wrenches and adjusting tools are removed.

■Store unused equipment in a dry, locked place

out of the reach of children.

■Store the hedge trimmer where petrol vapours

cannot come into contact with open ﬁre or

sparks. Allow the hedge trimmer to cool down before stor-

ing it.

■When transporting or storing the hedge trimmer,

always cover the cutting unit with the cutting unit

protector.

■Do not repair the device unless you are qualiﬁed

for such kind of work. Do not carry out repair opera-

tions on the machine other than those described in section

“12. Cleaning and Maintenance” but contact the manufac-

turer or authorized customer service centres.

■Avoid using the hedge trimmer if people, and es-

pecially children, are in the vicinity.

■If the cutting unit touches a foreign object, the

operating noises get louder or the hedge trim-

mer vibrates unusually excessively, stop the en-

gine and allow the hedge trimmer to come to a

standstill. Disconnect the spark plug connector from the

spark plug and take the following measures:

1. check for damage;;

2. check for loose parts and fasten all parts;;

3. replace damaged parts with equivalent parts or have

them repaired.

■Do not use the hedge trimmer with a faulty or

heavily worn cutting unit.

■To reduce the risk of ﬁre, make sure that the en-

gine and silencer are free of debris, leaves or

leaking lubricant.

■Always use both hands when the hedge trimmer

is equipped with two handles.

■If the hedge trimmer is shut down for mainte-

nance, inspection or storage, turn oﬀ the engine,

disconnect the spark plug connector from the

spark plug and ensure that all rotating parts

have stopped. Allow the machine to cool down before

checking, adjusting, etc.

Repairs to other parts of the machine must be carried out by the

manufacturer or one of his customer service points.

Use only original spare parts. Accidents can arise for the user

through the use of other spare parts. The manufacturer is not

liable for any damage or injury resulting from such action.

6.3 Safe handling with fuels

Handle fuel with care! Fuels and fuel vapours are

inﬂammable and may cause serious injury on the

skin or when inhaled. Therefore be careful and provide

suﬃcient ventilation when handling with fuels.

■Stop the engine and allow the device to cool

down before fuelling it.

■Do not smoke and avoid open ﬂames when fuel-

ling.

■Wear gloves when fuelling.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 315808 PHS 9500 A1 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 5,86 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 315808 PHS 9500 A1 Manual

Product: