749291
15
Zoom out
Zoom in
Previous page
1/74
Next page
PDS 290 C3
12 GBIE
DELTA SANDER PDS 290 C3
Introduction
Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.
Intended use
Depending on the sandpaper being used, this
appliance is suitable for the dry sanding of wood,
plastic, metal, filler and also painted surfaces.
The appliance is particularly suitable for corners,
edges and hard-to-reach areas. Any other usage of
or modification to the appliance is deemed to be
improper and carries a significant risk of accidents.
The manufacturer accepts no responsibility for
damage(s) resulting from improper usage. This ap-
pliance is not intended for commercial use.
Features
ON/OFF switch
Speed adjustment wheel
Power cord
Extraction nozzle
Air vents
Sanding plate (360° rotation)
Adapter for dust extraction
Reducer
Sanding sheet
Package contents
1 delta sander PDS 290 C3
3 sanding sheets
1 adapter for dust extraction
1 reducer
1 set of operating instructions
Technical data
Rated power
consumption: 290 W
Rated voltage: 230 V ∼ 50 Hz
(AC)
Rated idle speed: n0 6000–11000 rpm
Rated no-load
oscillation speed: n0 12000–22000 rpm
Sanding plate: 360° rotation
Protection class: II / (double insulation)
Noise emission value:
Noise measurement value determined in accor-
dance with EN 62841. The A-rated noise level of
the power tool is typically as follows:
Sound pressure level LPA: 82 dB (A)
Uncertainty KpA: 3 dB
Sound power level LWA: 93 dB (A)
Uncertainty KWA: 3 dB
Wear hearing protection!
Vibration emission value:
Vibration values (vector total of three directions)
determined in accordance with EN 62841:
Vibration emission value ah = 8.2m/s2
Uncertainty K = 1.5 m/s2
NOTE
The total vibration value and the stated noise
emission values specified in these instructions
have been measured in accordance with a
standardised measuring procedure and can
be used to make equipment comparisons. The
specified total vibration value and the noise
emission values can also be used to make an
initial exposure estimate.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 312187 PDS 290 C3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 312187 PDS 290 C3 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 0,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info