749340

Parkside IAN 312142 PLBS 30 B2 Manual

8
Zoom out
Zoom in
Previous page
1/13
Next page
08
Switching on and off
• Connect the soldering iron to the mains to switch it on and to heat it up.
• Disconnect the soldering iron from the mains to switch it off and to cool it down.
4. Using the soldering iron
deCAUTION DANGER OF BURNS!
The soldering iron, the soldering tip and the soldering iron holder
remain hot for some time after disconnection from the mains!
Working with the device (fig. D / E)
• Connect the mains cable (6) with a suitable mains supply and store the soldering iron with
the tip in the tool holder (15) of the tool stand (1). Allow the soldering iron to heat up. This
can take approximately 3 to 5 minutes depending on the required working temperature.
• Before soldering the soldering tip has to be tinned. Heat up a new or a soldering tip that
has been cleaned with the cleaning sponge (2) and coat it by making contact with the
solder wire.
• Before starting work on the a particular workpiece and/or type of material, check for
suitability by testing the soldering iron on a similar piece of (scrap) material.
• Clean the parts you wish to join before starting to solder.
- Touch the edge of the flux-cored solder wire on to the very end of the soldering tip (6) to
melt the solder wire. The workpiece is coated with the flux, which flows out of the solder
wire, allowing the solder to join the metal.
• If the soldering iron is used for longer periods we recommend that you clean the tip
occasionally with the cleaning sponge (2) and re-tin the tip if necessary. Use a de-
soldering braid (not supplied) to clean the joint, to de-solder and to remove excess
solder from the joint. Cover the excess solder with the de-soldering braid and heat up the
soldering tip (9). The melting solder is soaked up by the de-soldering braid.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 312142 PLBS 30 B2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 312142 PLBS 30 B2 in the language / languages: English as an attachment in your email.

The manual is 1,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside IAN 312142 PLBS 30 B2

Parkside IAN 312142 PLBS 30 B2 User Manual - German - 13 pages

Parkside IAN 312142 PLBS 30 B2 User Manual - Dutch - 13 pages

Parkside IAN 312142 PLBS 30 B2 User Manual - French - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info