749288
16
Zoom out
Zoom in
Previous page
1/53
Next page
16 GB/IE
Before use
Charging the product
Note: Remove all packaging materials from the product.
Note: You can recharge the product using a normal household socke
t
or using your car‘s cigarette lighter socket.
Note: The fuse of the car adapter 12 can be exchanged. The tech-
nical data of the fuse must comply with information given in the sec-
tion “Technical data”. The fuse may only be replaced by a qualified
electrician.
CAUTION! Do not connect the product to your car‘s cigarette
lighter socket if the car battery is already old and worn. Doing so
could mean that the car engine will no longer start.
Note: In order to use the product without a mains adapter 11 or a
car adaptor 12 , you need to recharge the rechargeable battery
before use. The charging process takes about 5–7 hours.
Note: Charge the product for approx. 12 hours prior to first use.
Connect the USB cable 13 with the USB connector of the mains
adapter 11 or the car adapter 12 .
Connect the micro-USB connector on the USB cable 13 to the
micro-USB input socket 8 on the product.
Plug the mains adapter 11 into a socket, or plug the car adapter
12 into the cigarette lighter socket in your vehicle.
Note: During charging from a cigarette lighter socket, ensure that
the car adapter 12 is always completely inserted into the cigarette
lighter socket of the vehicle. Failure to observe this advice may result
in risk of fire from overheating
Note: During charging, the charging indicator 9 lights up red.
When charging is complete, the charging indicator 9 lights up
green. When the charging indicator 9 is green, pull the mains
adapter 11 out of the socket or the car adapter 12 out of the
cigarette lighter socket. Disconnect the adapter from the product to
prevent the rechargeable battery from discharging.
Use
You can secure the product by using the folding hook 10 or the
magnetic base 4 on a flat, ferromagnetic surface.
Using the product without
a power connection
Fully charge the product as described in the section
“Charging the product“.
Press the ON / OFF switch 2 once to switch on the hand
spotlight 1 with full power.
Press the ON / OFF switch 2 again to switch on the hand
spotlight 1 with low power.
Press the ON / OFF switch 2 again to switch off the hand spot-
light 1 and switch on the orientation light 6.
Press the ON / OFF switch 2 again to switch off the orientation
light 6.
To switch on the telescopic work light 3, pull the hand spotlight
1 carefully out of the lamp body, with holding the grip 7.
To switch the telescopic work light 3 off, push the hand spot-
light 1 back into the lamp body, with holding the grip 7 (see
Fig. A).
The lamp head may be titled over 90º to allow for lighting a
specific work area (see Fig. A).
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 311854 PATC 2 A1 CORDLESS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 311854 PATC 2 A1 CORDLESS in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info