749304
16
Zoom out
Zoom in
Previous page
1/60
Next page
16
GB IE
Adapter with threaded
connector
The adapter (25) is intended for use with
PARKSIDE high-pressure cleaners
PHD 100 A1, PHD 100 B2, PHD 100 C2,
PHD 100 D2, PHD 150 A1, PHD 150 B2,
PHD 150 C2, PHD 150 D3.
1. Insert the adapter into the water con-
nection (15) on the handgrip (11) of
your telescopic tube. You will hear it
click into place.
2. Establish a water connection with your
high-pressure cleaner via the adapter
(25) on the water connection (15) on
the handgrip (11) of your telescopic
tube.
Quick-Connect adapter
(third-party devices)
Quick-Connect adapter (26) with securing
clip (27) for high-pressure cleaners
made by third-party manufacturers.
1. Insert the Quick-Connect adapter
(third-party devices) (26) into the water
connection (15) on the handgrip (11)
of your telescopic tube. You will hear it
click into place.
2. Remove by pulling the securing clip
(27) for the Quick-Connect adapter
(third-party devices) (26).
3. Establish a water connection with your
high-pressure cleaner via the adapter
(26) on the water connection (15) on
the handgrip (11) of your telescopic
tube.
4. Secure the connection by inserting the
securing clip into both holes of the
Quick-Connect adapter (third-party de-
vices) (26).
Using detergents
The pressure cleaner was designed for
operation with a neutral detergent based
on a biologically decomposable anionic
tenside. Other detergents or chemical sub-
stances could impair the safety of the pres-
sure cleaner and damage it. Such damage
to the equipment is not covered by the
guarantee.
Cleaning and
Maintenance
Always remove the mains plug of
the high pressure cleaner before
working on the device. There is a
risk of electric shock or injury from
moving parts.
Cleaning
Always keep the device clean. Do
not use any detergents or solvents.
Only clean the device with a soft brush
or a slightly moist cloth.
Maintenance
The device is maintenance-free.
Storage
Store the device in a frost-free room.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 311147 PTL 4 B2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 311147 PTL 4 B2 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 1,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info