749306

Parkside IAN 310920 PFMR 1600 A1 Manual

26
Zoom out
Zoom in
Previous page
1/95
Next page
27 GB/IE
Setting the speed by ON/OFF
switch (see fig. E)
NOTE
uThe ON/OFF switch has a variable speed
control.
uYou cannot change the speed setting
during continuous operation.
Press the ON/OFF switch 5 lightly for a low
speed.
Increase the pressure to increase the speed.
Speed pre-selection
(see fig. F)
The product can be preset to desired rotational
speed from level 1 to 6 for mixture of different
viscosity.
Set the desired speed using the speed control dial
7.
NOTE
uAlways start from lowest speed setting,
level 1, then increase the pre-selected
speed until best mixing effect is achieved.
Working with the mixer
Dip the universal stirrer 4 into the material
you want to mix at a low speed.
Once the spiral
4a
is completely immersed in
the material you can increase the speed.
During mixing, move the universal stirrer 4
through the mixing container and continue
mixing until the material is thoroughly mixed.
After use
1. Switch the product off. Disconnect the product
from the mains and let it cool down.
2. Check, clean and store the product as
described below.
Cleaning and care
m WARNING!
Always switch the product off,
disconnect it from the mains and let the
product cool down before performing
inspection, maintenance and cleaning
work!
Cleaning
The product must always be kept clean, dry
and free from oil or grease. Remove debris
from it after each use and before storage.
Regular and proper cleaning will help ensure
safe use and prolong the life of the product.
Inspect the product before each use for worn
and damaged parts. Do not operate it if you
find broken and worn parts.
Never allow fluids to get into the product.
Clean the product with a dry cloth. Use a
brush for areas that are hard to reach.
In particular clean the air vents after every
use with a cloth and brush.
Remove stubborn dirt with high pressure air
(max. 3 bar).
Remove the universal stirrer 4 from the
agitator shaft 3 (Fig. C, D). Clean the
universal stirrer 4 with water.
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 310920 PFMR 1600 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 310920 PFMR 1600 A1 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 1,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info