Manual Parkside IAN 310860 PFBS 160 B2 (page 27 of 130) (English, German, Dutch, French, Polish)

749296

Zoom out

Zoom in

1/130

PFBS 160 B2

■ 24 │ GB│IE

e) Grinding discs, sanding drums or other ac-

cessories must match exactly the grinding

spindle or collet chuck of your power tool. Ac-

cessory tools which do not ﬁt precisely into the

take-up of the power tool will rotate unevenly, vi-

brate severely and can lead to a loss of control.

f) Discs, grinding cylinders, cutting tools or

other accessories mounted on a mandrel must

be inserted completely in the collet or chuck.

Any "protrusion" or exposed parts of the

mandrel between the grinding tool and the

collet or chuck must be kept to a minimum. If

the mandrel is not suﬃciently tightened or the

grinding tool protrudes too far, the attachment

part can come loose and be ejected at high

speed.

g) Never use damaged attachment parts.

Before each use, check accessory tools such

as grinding discs for chips or cracks, sanding

drums for cracks, wearing or excessive wear

and tear and wire brushes for loose or broken

wires. If the power tool or the attachment part

is dropped, check to see if it is damaged or

use an undamaged attachment part. When

you have checked and inserted the attachment

part, ensure that you and any other people

nearby remain outside of the range of the

rotating attachment part and allow the tool

to rotate at maximum speed for one minute.

Damaged accessory tools usually break during

this test period.

h) Wear personal protective equipment.

Depending on the application, ensure that

you use full face protection, eye protection or

goggles. If appropriate, use a dust mask, ear

protectors, protective gloves or special apron

to protect you from grindings and material

particles. The eyes should be protected from

ﬂying debris that may be caused during certain

applications. Dust or ﬁlter masks must be used

to ﬁlter any dust created by the application. If

you are exposed to loud noise for any length

of time, you can suﬀer a hearing loss.

i) Ensure that other people remain at a safe dis-

tance to your workspace. Anyone who enters

the workspace must wear personal protective

equipment. Fragments of the workpiece or bro-

ken accessory tools can ﬂy oﬀ and cause injury

– even outside the immediate working area.

j) Hold the power tool only by the insulated

gripping surfaces when performing work

during which the attachment part can contact

hidden wiring or its own cord. Contact with

a live cable may also cause metal parts of the

appliance to become live and may result in an

electric shock.

k) Always hold the power tool ﬁrmly. When

running up to full speed, the torque of the motor

can cause the power tool to twist.

l) If possible, use clamps to hold the workpiece

in position. Never hold a small workpiece

in one hand and the power tool in the other

while you are using it. By clamping small

workpieces, you keep both hands free for better

control of the power tool. When cutting round

workpieces such as dowels, rods or pipes, be

aware that these can roll away and this can

cause the tool to jam and be thrown towards

you.

m) Hold the power cord away from any rotating

accessories. If you lose control of the appli-

ance, the cord may get cut or caught and your

hand or arm could get caught in the rotating

accessory tool.

n) Never put the power tool down until the

attachment part has come to a complete

standstill. The rotating accessory tool could

come into contact with the surface and cause

you to lose control of the power tool.

o) When changing attachment parts or the

settings on the appliance, tighten the collet

nut, the chuck or other ﬁxing elements tightly.

Loose fastening elements can shift unexpectedly

and lead to loss of control; unsecured, rotating

components will ﬂy oﬀ violently.

p) Do not leave the power tool running while

you carry it. Accidental contact between your

clothing and the rotating accessory tool could

lead to a physical injury.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 310860 PFBS 160 B2 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 2 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 310860 PFBS 160 B2 Manual

Product: