Manual Parkside IAN 307044 PKS 2200 A1 (page 49 of 196) (English, German, Dutch, French, Polish)

749294

Zoom out

Zoom in

1/196

IEGB

• Ensure that you have secure footing and

balance your body weight evenly on

both feet. If possible, the trunk should

be protected and supported by branch-

es, logs or wedges. Follow the simple

instructions for easy sowing.

1. Log is lying on the ground:

Saw through the log completely

from above and ensure at the end

of the cut not to contact the ground.

If you can turn the tree trunk, saw

two-thirds of the way through it. Then

turn the trunk around and saw the

rest of the way through from above.

2. Log is supported at one end:

Start sawing from the bottom and

work your way up (with the upper

edge of the bar) a third of the way

into the diameter of the trunk to

prevent splitting. Then saw from

the top downwards with the lower



cut to prevent the bar from becom-

ing jammed in the wood.

3. Log is supported at both ends:

Start from the top and work down

(with the lower edge of the bar) to a

third of the diameter of the trunk. Then

saw from underneath with the upper

edge of the bar until the two cuts meet.

4. Sawing on a sawhorse:

Hold the electric chainsaw steady

with both hands, keeping the saw

in front of you while sawing. Once

the saw is through the wood, guide

the machine passed you on the

right (1). Hold your left arm as

straight as you can (2). Watch out

for the falling trunk. Position your-

self to prevent any danger from the

separated trunk. Watch your feet.

The trunk may cause injuries when

falling. Keep your balance (3).

Maintenance and

cleaning

Basically, carry out mainte-

nance and cleaning works

with switched-off motor and

power plug removed. Danger

of injury!

Leave any maintenance and

servicing work not covered

by this manual to our Ser-

vice-Center. Use only original

spare parts.

Allow the machine to cool

down before all maintenance

and cleaning works. Danger

of burn injuries!

Cleaning

• Clean the machine thoroughly after eve-

ry use. In this way, you extend the life of

the machine and avoid accidents.

• Keep the gripping handles free of petrol,

oil or grease. Clean the gripping han-

dles, where appropriate, with a moist

cloth soaked in soap. Use no solvents or

petrol for cleaning!

• Clean the saw chain after every use. Use

a paint brush or wipe for that. Do not use

any liquids to clean the chain. After clean-

ing, oil the chain lightly with chain oil.

• When cleaning, also remove the chain

wheel cover (

8) so that this area can

be cleaned as well.

• Clean the chain bar (Guide) (

4).

• Clean the ventilation slots and the sur-

faces of the machine with a paint brush,

whisk or dry cloth. Do not use any liq-

uids for cleaning.

• Clean the oil passages of the chain bar

( 26), in order to guarantee a trouble-

free, automatic oiling of the saw chain

during operation.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 307044 PKS 2200 A1 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 2,9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 307044 PKS 2200 A1 Manual

Product: