749294
35
Zoom out
Zoom in
Previous page
1/196
Next page
35
IEGB
F
23 Bar bolt
24 Sprocket
25 Tab
26 Oil passages
Function description
The chainsaw is driven by an electric mo-
tor. The circulating chain is led around a
saw bar (guide rail).

tensioning system and a fast-acting chain
brake. An automatic oil dosing regulator
ensures continuous chain lubrication.
The chainsaw is equipped with various

user.
Refer to the following descriptions for the
function of control elements.
Technical Data
Electrical chainsaw ...............PKS 2200 A1
Rated input
voltage U ................. 230-240 V~, 50 Hz
Input power P ............................2200 W
Safety class ...................................... II
Protection category...........................IPX0
Chain speed v0 .........................15,3 m/s
Weight
(without guide rail and chain) .........4,4 kg
Weight (with guide rail and chain) ..5,1 kg
Oiltank ...........................approx. 250 ml
Chain ..........................Oregon 91P057X
Chrome cutting teeth, low-kickback
Chain bar ....... Oregon 16“ Double-Guard
......................... 160SDEA041 - 112364
Chain link separation ................... 10 mm
Chain width ............................... 1,3 mm
Teeth of the sprocket chain wheel ........... 6
Length of the chain bar ............... 460 mm
Sawing length ........................... 395 mm
Acoustic pressure level
(LpA) .................. 93,4 dB (A); KpA= 3 dB
Sound power level (LWA)
measured .... 104,8 dB (A); KWA= 2,6 dB
guaranteed ......................... 107 dB(A)
Vibration (ah) .......5,53 m/s2; K= 1,5 m/s2
Noise and vibration values were deter-
mined according to the standards and
stipulations mentioned in the declaration of
conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched
off and times when it is switched on
but running without any load).
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 307044 PKS 2200 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 307044 PKS 2200 A1 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 2,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info