748955
29
Zoom out
Zoom in
Previous page
1/120
Next page
26 PLS 48 D2
| GB | IE
NOTE
fBefore use, remove the protective cap from the soldering tip t.
fBefore using the soldering station for the first time and also when
using each new soldering tip, the soldering tip must be t tinned
first.
fThe prerequisite for perfect soldering is the use of suitable
solder. In addition, perfect soldering can only be achieved when
the correct soldering temperature is achieved. If the soldering
temperature is too low, the solder does not flow sufficiently and
causes dirty soldering joints (so-called cold soldering joints). Due
to soldering temperatures which are too high, the solder burns
and the solder does not flow. In addition, the materials to be
processed can be destroyed.
The following temperature settings are for the most common applications.
Differences are possible depending on the solder / manufacturer. The
different levels have no locking function, which ensures the same consistent
setting at the pre-selected level. Slight deviations are possible.
Minimum setting = Room temperature
Level 1: Approx. 100 °C - Warming up level and for solders with
corresponding low melting temperature.
Level 2: Approx. 200 °C Melting point of the most commonly
used soft solder.
Level 3: Approx. 300 °C Normal operation, e.g. when using
lead-free solder.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 306960 PLS 48 D2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 306960 PLS 48 D2 in the language / languages: English, German, Dutch, Danish, French, Polish as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info