748078
24
Zoom out
Zoom in
Previous page
1/102
Next page
24
GB IE
Setting up
1. Pull the curved handle (1) up as far as
it will go.
 
gun) (28) to the jet gun (16). Ensure
that the hose runs to the front, so as not
to impede the handle (1).
3. Connect the feed hose to the water
supply and allow water to escape from
the other end of the feed hose with no
bubbles, in order to expel the air from
the feed hose. Switch off the water tap.
4. Connect the feed hose with the help of
the quick connector for garden hose
adapter (25) with the water connection
coupling (13) and the water connec-
tion (14) on the device.
5. Connect to the spray gun (16) by
inserting and screwing in the jet pipe
(20).
6. If the jet pipe (20) is mounted, connect
either the turbo dirt mill (24) or the
standard Vario nozzle (18) by screw-
ing in with the jet pipe (20).
7. Screw in to connect the detergent con-
tainer with nozzle (9) directly to the
spray gun (16). With using the clean-
ing agent container with the nozzle
(9), pour only cleaning agent into the
container. It is sucked in automatically.
The roles of the unit, use the handle
(1) only in conjunction with the
wheels (12). For lifting and carrying
use the carrying handle.
The width of the jet can be in-
creased by turning the end of the
nozzle to the left. To reduce the
width of the jet, turn the end of the
nozzle to the right.
Mains connection
The pressure cleaner you have acquired

equipment is designed for connection to
an earthed wall socket with a residual
current operated device (RCD switch) at

Only operate the pressure cleaner
after all the above points have been
observed.
1. Ensure that the pressure cleaner is
turned off by its ON / OFF switch (7).
2. Insert the mains plug into the mains
socket
Operation
Be prepared for the recoil
force of the emitted wa-
ter jet! Ensure that you are

are holding the gun (16) se-

injure yourself or other
people.
Never operate the pressure cleaner
with a closed water tap. Dry run-
ning will damage the pressure
cleaner!
1. Turn on the water tap entirely.
2. Switch on the pressure cleaner with the
ON / OFF switch (7).
Only ever switch on the pressure clean-
er once you have connected all of the
water pipes and they do not leak.
The motor switches on until the re-
quired pressure has built up. After
the pressure has built up, the motor
switches off.
3. Press the gun (16) starting lever (21).
The nozzle operates by pressure and
the motor switches back on.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 305729 PHD 150 G4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 305729 PHD 150 G4 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 1,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info