749338
9
Zoom out
Zoom in
Previous page
1/52
Next page
9
GB IE CY
To avoid accidents and injuries from
electric shocks:
Ensure that the mains cable is
not damaged by being pulled
over sharp edges, by jamming,
or by pulling on the cable.
Before each use, check the pow-
er supply lead and the extension
cable for damage and ageing.
Do not use the equipment if the
cable is damaged or worn. Dan-
ger of electric shock hazard.
If the power cable for this equip-
ment is damaged, it must be
replaced by the manufacturer,
a customer service agent of the
same or a similarly qualied per-
son in order to prevent hazards.
Switch the machine off and dis-
connect the mains plug:
- when the machine is not in use,
- before the machine is opened
up,
- for all maintenance and clean-
ing work,
- if the connecting cable is dam-
aged or tangled up.
Never use the mains lead to pull
the plug out of the socket or to pull
the appliance. Protect the cable
from heat, oil, and sharp edges.
Make sure that the mains volt-
age corresponds with the infor-
mation on the rating plate.
Only plug the appliance into a
socket which is safeguarded.
The device must only be con-
nected to a mains socket via a
residual-current circuit breaker
(RCD) with a rated leakage cur-
rent of not more than 30mA.
Do not expose the unit to rain
CAUTION! The following
states how damage to the ap-
pliance and possible injury to
people can be avoided:
Ensure that the machine is cor-
rectly assembled and the lters
are in the correct position.
Do not use without the lter. This
could damage the machine.
Only use replacement parts
and accessories delivered and
recommended by our Service
Centre. The use of parts by other
manufacturers immediately ren-
ders the guarantee void.
Only have repairs carried out
at our authorised customer ser-
vice points.
Observe the instructions for
cleaning and maintenance of
the machine.
Store the appliance in a dry
place and out of reach of chil-
dren.
Assembly
Pull out the mains plug.
Danger of electric shock.
1. Attach the castors (8) with ac-
cessory holders (8a) to the
underside of the container (6).
Fasten them with the enclosed
Phillips screws (8b).
2. Place the motor housing (3) on
top of the container (6) and
close it with the clips (5).
3. Lightly squeeze together the
ends of the retaining bracket
(29) and click it into the motor
housing (3).
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 304887 PNTS 1500 D5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 304887 PNTS 1500 D5 in the language / languages: English as an attachment in your email.

The manual is 1,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside IAN 304887 PNTS 1500 D5

Parkside IAN 304887 PNTS 1500 D5 User Manual - German, Dutch, French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info