748074
67
Zoom out
Zoom in
Previous page
1/140
Next page
BE
NL
67
Werkinstructies
Frezen
Frees altd in tegenovergestelde
richting: Hierb wordt het apparaat
in tegenovergestelde richting tot de
draairichting van de frees bewo-
gen.
(a)
(b)
Frees nooit in omlooprichting
(gelkloop). Het risico op on-
gevallen bestaat omdat het
apparaat uit de hand kan
worden getrokken.
Gebruik uitsluitend frezen waarvan het
vermelde toegelaten toerental minstens
even hoog is als het maximale toeren-
tal dat is vermeld op het apparaat.
Gebruik steeds het passende werktuig.
Gebruik geen stompe of beschadigd
werktuigen en accessoires.
Beweeg de kabel b het frezen steeds
naar achteren weg van het apparaat.
1. Bevestig het werkstuk veilig op het
werkvlak.
2. Plaats een frees.
3. Stel de gewenste freesdiepte en het
toerental in.
4. Schakel het apparaat in.
5. Laat de spanhendel ( 19) los en
duw het apparaat tot wanneer de
diepteaanslag (
17) erop zit, lang-
zaam naar omlaag. Vergrendel het
apparaat met de spanhendel opnieuw.
6. Houd het apparaat tdens het werk
met beide handen vast en frees met
gelkmatige snelheid.
7. Na het werk laat u de spanhendel (
19) los en beweegt het apparaat naar
omhoog.
8. Schakel het apparaat uit.
Rand- en proelfrezen
a
B rand- of proelfrezen zonder pa-
rallelaanslag moet de frees met
aanloopring (a) als geleiding zn
uitgerust.
1. Beweeg het ingeschakelde apparaat
langs het werkstuk tot de aanloopring
tegen de te bewerken werkstukrand
ligt.
2. Houd het apparaat met beide handen
aan de rand van het werkstuk (1) vast.
Vermden van een te sterke druk.
Frees met parallelaanslag
Met de parallelaanslag kunt u sleuven en
proelen frezen als u de parallelaanslag
op een vooraf ingestelde afstand langs de
rand van het werkstuk beweegt.
1. Schuif de parallelaanslag (24)
met de geleidingsstangen (29)
in de geleidingsrails (15) van de
bodemplaat (10). Draai de vast-
zetschroeven (9) vast.
2. Beweeg het ingeschakelde ap-
paraat met zdelingse druk op
de parallelaanslag (24) langs de
rand van het werkstuk.
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 304379 POF 1200 C2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 304379 POF 1200 C2 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 3,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info