Manual Parkside IAN 304379 POF 1200 C2 (page 27 of 140) (English, German, Dutch, French, Portuguese, Spanish)

748074

Zoom out

Zoom in

1/140

IEGB

tools are dangerous in the hands of un-

trained users.

• Maintain power tools. Check for

misalignment or binding of mov-

ing parts, breakage of parts and

any other condition that may af-

fect the power tool’s operation.

If damaged, have the power tool

repaired before use. Many acci-

dents are caused by poorly maintained

power tools.

• Keep cutting tools sharp and

clean. Properly maintained cutting tools

with sharp cutting edges are less Iikely to

bind and are easier to control.

• Use the power tool, accessories

and tool bits etc. in accordance

with these instructions, taking

into account the working condi-

tions and the work to be per-

formed. Use of the power tool for

operations different from those intended

could result in a hazardous situation.

• Carefully inspect the area to be cut and

remove all wires or other foreign bodies.

Service

• Have your power tool serviced

by a qualied repair person us-

ing only identical replacement

parts. This will ensure that the safety of

the power tool is maintained.

Safety notices for milling

cutters

Warning! Milling can result in

the formation of dusts hazardous to

health (e.g. arising from materials

with paints containing lead, materi-

als containing asbestos or some

wood types), which can pose a risk

to the operator or persons nearby.

Make sure that the workplace is

well ventilated. Always wear safety

goggles and respiratory protection.

Attach a dust extraction system.

• Hold the power tool on the insu-

lated handle surfaces, as the cut-

ter might hit its own power cable.

Contact with a live wire can also cause

a charge in metal parts of the appliance

and result in an electric shock.

• Fasten and secure the workpiece

by means of clamps or with

another method on a stable un-

derground. If you hold the workpiece

only with your hand or against your own

body, it will stay instable and this can

lead to a loss of control.

• The permissible rotation speed of

the attachment tools must be at

least as high as the highest rota-

tion speed indicated on the pow-

er tool. Accessories that run faster than

the permissible speed can be destroyed.

• Cutters and other accessories

must be exactly matching the

tool holder (collet chuck) of your

power tool. Attachment tools that are

not exactly matching the tool holder of

the power tool rotate unevenly, vibrate

very strongly and can ultimately lead to

a loss of control.

• Ensure that the cutter is assem-

bled correctly. A cutter that is not as-

sembled correctly can break during the

milling or be ejected and present a risk

of injury.

• Move the power tool against the

workpiece only when it is turned

on. Otherwise, there is a risk of kick-

back if the attachment tools jam in the

workpiece.

• Do not put your hands in the cut-

ting area and neither on the cut-

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 304379 POF 1200 C2 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 3,35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 304379 POF 1200 C2 Manual

Product: