748074
24
Zoom out
Zoom in
Previous page
1/140
Next page
24
GB IE
27 Combination wrench
with long hole
28 Allen key
29 2 guide bars
30 Reducer piece (dust suction)
6-part cutter set:
31 Prole cutter (
25 mm, R 4 mm)
32 Rounding cutter
(
22 mm, R 6.3 mm)
33 V-notch cutter (
12.7 mm,
)
90°)
34 Notch cutter (
12 mm)
35 Notch cutter (
6 mm)
36 Fillet cutter (
22 mm, R 6.3 mm)
37 Spring, collet chuck
Technical data
Router Cutter ........................ POF 1200 C2
Rated input voltage
.......... 230 V~, 50 Hz
Idling speed n
0
..........11000-30000 min
-1
Power input ..............................1200 W
Plunge depth
............................... 55 mm
Tool holder
.......................... 6 mm/8 mm
Protection class
................................. II
Protection category...........................IPX0
Weight (incl. accessories)
... approx. 3.3 kg
Sound pressure level (L
pA
) .90 dB(A); K
pA
=3 dB
Sound power level (L
WA
) .101 dB(A); K
WA
=3 dB
Vibration (a
h
) .......... 5.4 m/s
2
; K=1.5 m/s
2
Noise and vibration values have been
determined according to the standards and
regulations mentioned in the declaration of
conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
An example of a measure to reduce
vibration exposure when using the
tool is limiting the working hours.
Safety precautions aimed at protect-
ing the user should be based on
estimated exposure under actual
usage conditions (all parts of the
operating cycle are to be consid-
ered, including, for example, times
during which the power tool is
turned off and times when the tool
is turned on but is running idle).
Safety instructions
Ensure that the safety instructions are ob-
served when operating the appliance.
Symbols in the manual
Warning symbols with in-
formation on damage and
injury prevention.
Hazard symbol with infor-
mation on the prevention of
personal injury caused by
electric shock.
Instruction symbols with information
on preventing damage.
Wear protective gloves.
Remove the plug from the mains.
Help symbols with information on
improving tool handling.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 304379 POF 1200 C2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 304379 POF 1200 C2 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 3,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info