748157
20
Zoom out
Zoom in
Previous page
1/114
Next page
GB IE
20
General Description
The illustration of the principal
functioning parts can be found
on the foldout page.
Scope of delivery
Carefully unpack the trimmer and check
that it is complete. Dispose of the packag-
ing material correctly.
• Device
Dust box
External dust extraction adaptor
3 sanding sheets (two-part)

 
 

Instruction manual
Overview
1 On/off switch
2 Hand rest
3 Vent
4 Release button dust collection box
5 Mains cable
6 Dust collection box lid
7 Tab for opening the
dust collection box
8 Dust collection box
9 Connection for dust extraction
10 Sanding plate
11 External dust extraction adaptor
12 3 sanding sheets (two-part)
 
14 3 sanding sheets for sanding

15 Extraction holes for sandig plate
16 Clamping lever for unlocking
sanding plate
 
18 Filter insert for dust collection box
Technical Data
Detail sander .......................... PHS 160 E5
Rated input voltage (U) ..... 230 V~, 50 Hz
Power input (P) ............................ 160 W
Idling speed (n0) ....................13000 min-1
Oscillation rate (n) .................26000 min-1
Weight (without accessories) ... appr. 1.1 kg
Protection class ................................. II
Protection category...........................IPX0
Sound pressure level
(LpA) ...................... 76 dB(A); KpA= 3 dB
Sound power level
(LWA) ....................87 dB(A); KWA = 3 dB
Vibration (ah) ........... 9 m/s2; K= 1.5 m/s2
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched
off and times when it is switched on
but running without any load).
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 303400 PHS 160 E5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 303400 PHS 160 E5 in the language / languages: English, German, Dutch, Danish, French, Polish as an attachment in your email.

The manual is 1,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info