748946
23
Zoom out
Zoom in
Previous page
1/136
Next page
23
GB IE
General description
See the fold-out pages for
illustrations.
Extent of the delivery
Carefully unpack the appliance and check
that it is complete. Dispose of the packag-
ing material correctly.
- Device
- Protective hood
- 2 cutting disks (pre-mounted)
- Vacuum adapter (pre-mounted)
- Reducing adapter for vacuum
- Chuck key
- Hand chisel
- Storage case
- Instructions for use
Functional description
The wall chaser cuts two grooves in brick-
work using two parallel diamond cutting
disks, without requiring the use of water.
Cabling grooves can be opened up by
removing the material in between the
grooves.
Please refer to the information from the
disc manufacturer.
Please refer to the descriptions below for
information about the operating devices.
Overview
1 Handgrip
2 On/off switch
3 Switch block
4 Auxiliary handle
5 Maintenance coverage
6 Marking
7 Spindle stop button
8 Cutting disc
9 Start roller
10 Vacuum connector
11 Vacuum adapter
12 Hand chisel
13 Chuck key
14 Rotational direction marking
15 Protective guard opening
16 Mounting spindle
17 
18 Retaining screw
 
20 Spacer disks
21 Flange
Technical data
Wall chaser .............PMNF 1350 D4
Rated input voltage ..........230 V~, 50 Hz
Power input .............................. 1350 W
Idling speed (n) .......................9000 min-1
Dimension of the cutting discs
............................... Ø 125 x 22,23 mm
Groove depth ......................... 0 - 30 mm
Groove width ................8 mm bis 26 mm
Spindle thread ................................ M14
Safety class .......... II (Double insulation)
Protection category..........................IP X0
Sound pressure level
(LpA) ...................... 94 dB(A); KpA= 3 dB
Sound power level (LWA)
measured ........... 105 dB(A); KWA= 3 dB
Vibration (ah) ......... 7,5 m/s2; K= 1,5 m/s2
The vibration values represent maximum
values which have been determined with the
sup
plied blade. The actual vibration values
may
vary depending on the used acces-
sories.
The vibration values are still affected by the
handling for the user‘s.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 303235 PMNF 1350 D4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 303235 PMNF 1350 D4 in the language / languages: English, German, Dutch, Danish, French, Polish as an attachment in your email.

The manual is 2,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info