748058
15
Zoom out
Zoom in
Previous page
1/74
Next page
PAH 1300 B2
12 
GB
IE
DEMOLITION HAMMER
PAH 1300 B2
Introduction
Congratulations on the purchase of your new ap-
pliance. You have selected a high-quality product.
The operating instructions are part of this product.
They contain important information on safety, us-
age and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the specified areas of application. Please also
pass on these operating instructions to any future
owner.
Intended use
The demolition hammer PAH 1300 B2 is suitable
for chiselling into concrete, stone and plaster.
Any other usage of or modification to the appliance
is deemed to be improper and carries a significant
risk of accidents.
The manufacturer accepts no responsibility for
damage(s) attributable to misuse.
The appliance is not intended for commercial use.
Depicted components
Handle (rubberised grip)
Locking switch
ON/OFF switch
Additional handle
Knurled nut for additional handle
Chisel adjustment ring
Tool holder
Locking collar
Pointed chisel
Flat chisel
Package contents
1 demolition hammer PAH 1300 B2
1 additional handle (pre-assembled)
1 flat chisel
1 pointed chisel
1 carrying case
1 set of operating instructions
Technical data
Nominal power: 1300 W
Rated voltage: 230V
~
50Hz
(alternating current)
Stroke rate: 3800 bpm
Impact energy: 15 Joules
Tool fitting: SDS MAX
Protection class: II /
(double shielded)
Noise emission value:
Noise measurement value determined in accordance
with EN 60745. The A-rated noise level of the
power tool is typically as follows:
Chiselling:
Sound pressure level: L
pA
= 87 dB (A)
Uncertainty K: 3 dB
Sound power level: L
WA
= 98 dB (A)
Uncertainty K: 3 dB
Wear hearing protection!
Guaranteed sound power level
LWA in dB.
Total vibration value:
Total vibration values (vector total of three direc-
tions) determined in accordance with EN 60745:
Main handle:
Chiselling: a
h(CHeq)
= 21.2 m/s
2
, K = 1.5 m/s
2
Auxiliary handle:
Chiselling: a
h(CHeq)
= 22.7 m/s
2
, K = 1.5 m/s
2
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 300553 PAH 1300 B2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 300553 PAH 1300 B2 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info