Manual Parkside IAN 300503 PDFW 120 A1 (page 31 of 141) (English, German, Dutch, French, Portuguese, Spanish)

748031

Zoom out

Zoom in

1/141

PDFW 120 A1 GB│IE │ 27 ■

h) Wear personal protective equipment.

Depending on the application, ensure that

you use full face protection, eye protection

or goggles. If required, use a dust mask, ear

protectors, protective gloves or special apron

to protect you from grindings and material

particles. The eyes should be protected from

ﬂying debris that may be caused during certain

applications. Dust or ﬁlter masks must be used

to ﬁlter any dust created by the application. If

you are exposed to loud noise for any length

of time, you may suﬀer hearing loss.

i) Ensure that other people remain at a safe

distance to your workspace. Anyone who

enters the workspace must wear personal

protective equipment. Fragments of the work-

piece or broken accessory tools can ﬂy oﬀ

and cause injury – even outside the immediate

working area.

j) Hold the power tool only by the insulated

gripping surfaces when performing an opera-

tion where the accessory tool may contact

hidden wiring or its own cord. Contact with

a live cable may also cause metal parts of the

appliance to become live and may result in an

electric shock.

k) Always hold the power tool ﬁrmly. When

running up to full speed, the torque of the

motor can cause the power tool to twist.

l) If possible, use clamps to hold the workpiece in

position. Never hold a small workpiece in one

hand and the power tool in the other while

you are using it. By clamping small workpieces,

you keep both hands free for better control of the

power tool. When cutting round workpieces such

as dowels, rods or pipes, be aware that these

can roll away and this can cause the tool to jam

and be thrown towards you.

m) Hold the power cord away from any rotating

accessories. If you lose control of the appli-

ance, the cord may get cut or caught and your

hand or arm could get caught in the rotating

accessory tool.

n) Never put the power tool down until the

accessory tool has come to a complete stand-

still. The rotating accessory tool could come

into contact with the surface and cause you to

lose control of the power tool.

o) When changing accessory tools or changing

settings, tighten the collet nut, the chuck or

other ﬁxing elements tightly. Loose fastening

elements can shift unexpectedly and lead to

loss of control; unsecured, rotating components

will ﬂy oﬀ violently.

p) Do not leave the power tool running whilst

carrying it. Accidental contact between your

clothing and the rotating accessory tool could

lead to a physical injury.

q) Clean the ventilation slits of your power tool

regularly. The engine fan draws dust into the

housing and a strong accumulation of metal

dust can cause electrical hazards.

Do not use the power tool in the vicinity of ﬂam-

mable materials. Sparks can ignite such materials.

s) Do not use any accessory tools which require

liquid coolant. The use of water or other liquid

coolants may lead to an electric shock.

Additional safety instructions for all

applications

Kickback and corresponding safety instructions

Kickback is a sudden reaction caused when a

rotating accessory tool, e.g. grinding disc, abrasive

band, wire brush, etc. catches or jams. Catching

or jamming leads to an abrupt stop of the rotating

accessory tool. If this happens, an uncontrolled

power tool will turn rapidly against the direction

of rotation of the accessory tool.

If, for example, a grinding disc catches or jams, the

edge of the grinding disc that is projecting into the

workpiece can get caught and break oﬀ the grind-

ing disc or cause a kickback. The grinding disc can

then ﬂy in the direction of the operator or away

from him, depending on the direction of rotation of

the disc at the blockage. This can also break grind-

ing discs.

A kickback is caused by incorrect use or misuse

of the power tool. This can be avoided by taking

proper precautions as described below.

My Double bench grinder IAN 300503 has completely lost its torque. It gets up to speed OK, but loses power as soon as any pressure is put on. Has anyone any ideas? ( I haven't used it for a while though). Submitted on 15-8-2021 at 18:49
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 300503 PDFW 120 A1 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 5,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 300503 PDFW 120 A1 Manual

Product: