748034
25
Zoom out
Zoom in
Previous page
1/102
Next page
22 
GB
IE
PHKS 1350 C2
Before use
Check that the blade guard is
functioning correctly
WARNING! RISK OF INJURY!
Switch off the appliance and pull out the
power plug before starting any work on
the appliance.
Make sure that all moving parts of the blade
guard move freely without jamming and all
devices designed to cover the saw blade are
working correctly.
Activate the blade guard only using the
release lever for the blade guard .
Pull the release lever for the blade guard
all the way back.
When you let go of the release lever for the
blade guard , the blade guard must
move freely back to its starting position.
Initial operation
The PHKS 1350 C2 circular saw has Intelligent
Power Control. This automatic power delivery
system ensures that for a particular speed range
the power output remains constant when working
on harder and more resistant materials.
Fitting/changing the saw blade
NOTE
All blades used should conform to EN 847-1.
Use only saw blade with diameters corre-
sponding to the label on the saw.
Always pull out the plug from the mains before
changing the saw blade !
1. Set the cutting depth (using the locking screw )
to the minimum position, 0 mm.
2. Swing the blade guard back using the release
lever and put the device down.
3. Press the spindle lock button (until it engages)
and use the Allen key to release the clamping
screw/washer . Now remover the clamping
screw/washer and the clamping flange
(see also Fig. A).
Fig. A: Changing the saw blade
4. Remove saw blade .
5. Fitting a saw blade is carried out in the
reverse order.
6. Press the spindle lock button (until it engages)
and use the Allen key to tighten the clamping
screw/washer .
WARNING!
The arrow on the saw blade must corre-
spond to the arrow showing the direction of
rotation (running direction shown on the
device).
Ensure that the saw blade is suitable for the
rotational speed of the tool.
Mounting/setting the guide fence
Loosen the wing screw and insert the guide
fence into the guide fence slot .
Set the desired cut width with the help of the
scale on the guide fence and the marking
arrow in the base plate (see also Fig. B).
Fig. B: Cutting width 3 cm
Retighten the wing screw .
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 298883 PHKS 1350 C2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 298883 PHKS 1350 C2 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 5,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info