747879
23
Zoom out
Zoom in
Previous page
1/88
Next page
20 
GB
IE
PBSD 600 A1
Selecting speed and abrasive belt
You can use the belt speed adjusting wheel to
adjust the speed, even while the appliance is run-
ning. The optimum belt speed is dependent on the
workpiece or material being processed. We rec-
ommend carrying out a practice run to determine
the correct speed. In the table below, you will find
some recommended values which will help you de-
termine which belt and speed to use for which job.
Material/working
area
Softwood
Rough sanding
(grain size)
60
Finishing (grain size) 240
Speed preselection high (5–6)
Material/working
area
Hardwood
Rough sanding
(grain size)
60
Finishing (grain size) 180
Speed preselection high (5–6)
Material/working
area
Chipboard
Rough sanding
(grain size)
60
Finishing (grain size) 150
Speed preselection high (5–6)
Material/working
area
Removing paint/
varnish
Rough sanding
(grain size)
60
Finishing (grain size) ––
Speed preselection high (5–6)
Material/working
area
Rubbing down
paintwork/varnish
Rough sanding
(grain size)
150
Finishing (grain size) 320
Speed preselection low (1–2)
Material/working
area
Removing rust from
steel
Rough sanding
(grain size)
40
Finishing (grain size) 120
Speed preselection medium/high (3–4)
Material/working
area
Plastics
Rough sanding
(grain size)
120
Finishing (grain size) 240
Speed preselection low/medium (2–3)
Material/working
area
Non-ferrous metals
(e.g. aluminium)
Rough sanding
(grain size)
80
Finishing (grain size) 150
Speed preselection medium/high (3–4)
Stationary work
Turn the additional handle to the horizontal
position.
Turn the power tool as shown in the illustration
and place it on a stable worktop.
Fit the two screw clamps
in the recesses
provided and clamp the power tool tightly.
IB_285794_PBSD600A1_LB8.indb 20 06.03.18 11:15
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 298810 PBSD 600 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 298810 PBSD 600 A1 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 3,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info