748037
26
Zoom out
Zoom in
Previous page
1/112
Next page
26
GB IE
Overview of the LED indicators on
the charger (10):
Green LED (12) lights up
without battery inserted:
Charger ready.
Green LED (12) lights up:
Battery such alleged
charged.
Red LED (13) lights up:
Battery charging.
Used batteries
If a fully recharged battery lasts for
considerably shorter operating times,
the battery is used up and needs to be
replaced. Only use an OEM battery
pack replacement available from our
Customer Service.
Always take heed of the applicable
safety instructions as well as the envi-
ronmental protection regulations and
information (see “Cleaning and Main-
tenance”).
Checking the battery charge
level
The battery’s ( 5) charge level is indi-
cated by the charge state indicator ( 3).
The LEDs indicate the battery’s charge
level, when the device is in operation.
Press and hold the power button ( 7).
red-yellow-green => Battery fully charged
red and yellow => Battery half charged
red => Battery needs
to be charged
Operation
Use of vehicle adapter
Instead of the battery (5) you can also con-
nect the vehicle adapter (15) to the tool.
1. Insert the vehicle connection plug
( 16) into the 12 V cigarette lighter
socket of your car. The red LED will il-
luminate.
2. Slide the vehicle adapter (15) along
the guide rail into the tool. You will
hear it click into place.
3. To remove the vehicle adapter (15)
from the tool, press the release catch
(15a) on the vehicle adapter and pull
the vehicle adapter out.
The tool continues to draw power
when idle. Ensure that the vehicle
connection plug is not inserted if
you are not using the tool at that
time, to avoid draining the car’s
battery.
Set the direction of
rotation
You can select the direction of rotation
with the direction switch (clockwise and
anticlockwise direction).
1. Wait for the device to shut-down.
2. Clockwise direction:
Press direction switch (2) to the
right.
3. Anticlockwise direction:
Press direction switch (2) to the
left.
The direction changed may only be
performed in standstill mode.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 298550 PHSSA 12 Li A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 298550 PHSSA 12 Li A1 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 2,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info