748055
18
Zoom out
Zoom in
Previous page
1/64
Next page
18 GB/IE
Emptying the collection bag for
sandblasting material
Note: Do not reuse excess sandblasting material
from the collection bag
6
before it has been purified.
You can remove excess sandblasting material
which has collected in the collection bag
6
through the zip. Alternatively, you can loosen
the screw clamp
7
using a screwdriver and
remove the collection bag
6
from the product.
Troubleshooting
Error Possible cause Solution
No material flow The air is not dry enough. Install a water separator in
your compressed air system.
Air pressure is too low. Increase the pressure
of the compressor.
The attachment is not fitted
correctly.
Ensure that the attachment fits tightly on the
product and that no air can leak from the
sides.
Blocked sandblasting material
lines.
Check that there are no lumps of sandblast-
ing material blocking the lines. For best
results use a blow-out gun to clean blocked
lines (wear protective glasses!). Also check
the outlet of the tank.
The sandblasting
pattern is not as de-
sired.
The air is not dry enough. Install a water separator in your
compressed air system.
The size of the sandblasting
material is not consistent.
Replace the sandblasting material.
The sandblasting material is
contaminated.
Purify/replace the sandblasting material.
The attachment is worn-out. Replace the attachment.
Other errors Contact a specialist or retailer.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 298505 PDSP 1000 D4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 298505 PDSP 1000 D4 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info