748055

Parkside IAN 298505 PDSP 1000 D4 Manual

15
Zoom out
Zoom in
Previous page
1/64
Next page
15 GB/IE
Technical data
Operating pressure: 6.3 bar
Air consumption: 320 l / min
Container volume: 0.9 l
Air quality required: purified and oil-free
Setting values
for work: set operating pressure on
the pressure regulator or fil-
ter pressure gauge max.
6.3 bar.
Noise emission value:
Measured sound value determined according to
EN 1265. The A-rated noise level of the air tool is
typically:
Sound pressure level: L
= 94 dB(A)
Uncertainty: K
= 3 dB(A)
Sound power level: L
= 105 dB(A)
Uncertainty: K
= 3 dB(A)
Wear ear protection!
Vibration emission value:
Total vibration value determined
according to EN ISO 20643: ah < 2.5 m / s
2
The vibration level specified
in these instructions was measured in accordance
with an EN ISO 20643 standardised measurement
process and can be used to compare tools. The
vibration emission value specified can also serve as
a preliminary assessment of the exposure. Different
uses of the air tool give rise to different vibration levels
and in many cases they may exceed the values
given in these instructions. It is easy to underestimate
the vibration load if the air tool is used regularly in
particular circumstances. If you wish to make an
accurate assessment of the vibration loads experi-
enced during a particular period of work, you should
also take into account the periods when the product
is switched off or is running but is not actually in
use. This can result in a much lower vibration load
over the whole of the period of working.
Note: If you wish to make an accurate assessment
of the vibration loads experienced during a particular
period of working, you should also take into account
the intervening periods of time when the product is
switched off or is running but is not actually in use.
This can result in a much lower vibration load over
the whole of the period of working.
General safety
information
Please read all safety informa-
tion and instructions. Failure to observe the safety
information and instructions may result in electric
shock, fire, and/or serous injuries.
KEEP ALL SAFETY INFORMATION AND
INSTRUCTIONS FOR FUTURE REFERENCE.
Workplace safety
a) Keep your work area clean and well lit.
Untidy or poorly lit work areas can result in acci-
dents.
b) Do not use the product in explosive
environments with flammable liquids,
gasses or dust. The product can create
sparks which can ignite dusts or fumes.
c) Keep children and other people away
from the product during use. You could
lose control of the product if you are distracted.
Tool-specific safety information
for the compressed air
sandblaster
Check the product for damage before use.
Refrain from using the product if it is defective.
Keep children and other people away from the
product during use. You could lose control of
the product if you are distracted.
RISK OF INJURY! IMPROPER USE!
Never point the product at people and/or
animals.
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 298505 PDSP 1000 D4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 298505 PDSP 1000 D4 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info