746853
15
Zoom out
Zoom in
Previous page
1/74
Next page
PBH 1050 B2
12 
GB
IE
HAMMER DRILL PBH 1050 B2
Introduction
Congratulations on the purchase of your new
appliance. You have chosen a high-quality product.
The operating instructions are part of this product.
They contain important information about safety,
usage and disposal. Before using the product, please
familiarise yourself with all operating and safety in-
structions. Use the product only as described and for
the range of applications specified. Please also pass
these operating instructions on to any future owner.
Intended use
The PBH 1050 B2 hammer drill and power chisel
(hereinafter referred to as appliance) is suitable for:
Hammer-drilling into brickwork, concrete and stone
Chiselling into concrete, stone and plaster
Drilling into stone, wood and metal
Any other usage or modification of the appliance
is deemed to be improper and carries a significant
risk of accidents.
The manufacturer accepts no responsibility for
damage(s) attributable to misuse. The appliance
is not intended for commercial use.
Depicted components
Wing screw
Clockwise/anticlockwise switch
ON/OFF switch
Speed preselector wheel
Locking button for ON/OFF switch
LED
Function selector
Release button for function selector switch
Additional handle
Dust protection cap
Tool holder
Locking collar
Depth stop (not prefitted)
Quick-release chuck
Package contents
1 hammer drill PBH 1050 B2
1 additional handle
1 quick-release chuck with SDS plus system tool
fitting (see fig. A)
3 SDS drills (6/8/10 x 150 mm) (see fig. B)
1 flat chisel (14 x 250 mm) (see fig. B)
1 pointed chisel (14 x 250 mm) (see fig. B)
1 depth stop
50 g special grease for lubricating the drill chuck
1 carrying case
1 set of operating instructions
Technical data
Rated power
consumption: 1050 W
Rated voltage: 230 V ∼ 50 Hz
(AC)
Rated idling speed: n
0
0–980 rpm
Stroke rate: 0–5300 rpm
Impact energy: 3 J
Max. drill diameter: 13 mm for steel
32 mm for wood
26 mm for concrete
Protection class: II /
(double insulation)
Noise emission value:
Noise measurement value determined in accord-
ance with EN 60745. The A-rated noise level
of the power tool is typically as follows:
Hammer drilling:
Sound pressure level: L
pA
= 83.66 dB(A)
Uncertainty K: 3 dB
Sound power level: L
WA
= 94.66 dB(A)
Uncertainty K: 3 dB
Chiselling:
Sound pressure level: L
pA
= 90.62 dB(A)
Uncertainty K: 3 dB
Sound power level: L
WA
= 101.62 dB(A)
Uncertainty K: 3 dB
Wear hearing protection!
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 295939 PBH 1050 B2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 295939 PBH 1050 B2 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info