Manual Parkside IAN 293831 PSF 4.6 A1 (page 20 of 84) (English, German, Dutch, French, Portuguese, Spanish)

746848

Zoom out

Zoom in

1/84

PSF 4.6 A1

│

17 ■

h) Keep handles and grasping surfaces dry,

clean and free from oil and grease. Slippery

handles and grasping surfaces do not allow

for safe handling and control of the tool in un-

expected situations.

5. Use and handling of the cordless

electrical power tool

a) Charge the rechargeable battery unit using

only the charger recommended by the manu-

facturer. Chargers are often designed for a

particular type of rechargeable battery unit.

There is a risk of ﬁre if the battery charger speci-

ﬁed for a particular type of battery is used with

other batteries.

b) Only the rechargeable battery units supplied

are to be used with an electrical power tool.

The use of other rechargeable battery units may

lead to the danger of injury or ﬁre.

c) When they are not being used, store re-

chargeable battery units away from paper-

clips, coins, keys, nails, screws or other small

metal objects that could cause the contacts

to be bridged. Short-circuiting the contacts of

a rechargeable battery unit may result in heat

damage or ﬁre.

d) Fluids may leak out of rechargeable battery

units if they are misused. If this happens,

avoid contact with the ﬂuid. If contact occurs,

ﬂush the aﬀected area with water. Seek addi-

tional medical help if any of the ﬂuid gets into

your eyes. Escaping battery ﬂuid may cause

skin irritation or burns.

CAUTION! RISK OF EXPLOSION!

Never charge non-rechargeable

batteries!

■ Protect the rechargeable battery from heat,

for example from continuous exposure to

sunlight, ﬁre, water and moisture. There is a

risk of explosion.

6. Service

a) Have your power tool serviced by a qualiﬁed

repair person using only identical replace-

ment parts. This will ensure that the safety of

the power tool is maintained.

Safety guidelines for screw drivers

WARNING!

■ Hold the power tool by the insulated

gripping surfaces when performing an

operation where a screw may contact

hidden wiring. If a screw comes into contact

with a live wire, this may make exposed

metal parts of the power tool live and could

give the operator an electric shock.

■ Secure the workpiece! A workpiece securely

held by a clamping device or vice is much safer

than one held in your hand.

■ Hold the power tool ﬁrmly. High reaction

moments can occur for brief periods while

tightening and loosening screws.

■ Switch the power oﬀ immediately if the tool

blocks while in use. Be prepared for high reac-

tion moments as these can cause kickback.

■ While working on the appliance, transporting

it or storing it, always set the rotation direc-

tion switch to the centre position (lock).

This prevents the power tool from starting up

unintentionally.

Extended safety guidelines

■ Do not use a damaged or modiﬁed battery.

Damaged or modiﬁed batteries may behave

unexpectedly and cause ﬁres, explosions or

pose a risk of injury.

■ Do not expose a battery to ﬁre or excessively

high temperatures. Fire or temperatures in

excess of 130°C (265°F) can cause an ex-

plosion.

■ Follow all instructions regarding charging

and never charge the battery or the cordless

tool outside of the temperature range given in

the operating instructions. Incorrect charging

or charging outside of the permissible tempera-

ture range can destroy the battery and increase

the risk of ﬁre.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 293831 PSF 4.6 A1 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 293831 PSF 4.6 A1 Manual

Product: