746839
23
Zoom out
Zoom in
Previous page
1/89
Next page
PAT 20-Li A1
GB
IE
19
Attaching/disconnecting the battery
pack to/from the appliance
Inserting the battery pack:
Allow the battery pack
to click into place in
the appliance.
Removing the battery pack:
Press the release button
and remove the
battery pack .
Checking the battery charge level
Press the battery charge level button to
check the status of the battery (see also main
diagram).
The status will be shown on the battery display
LED as follows:
RED/ORANGE/GREEN = maximum charge
RED/ORANGE = medium charge
RED = low charge – charge the battery
Filling the magazine shaft
Remove the battery before carrying out any
work on the power tool (e.g. maintenance,
changing tools, etc.) as well as during the trans-
port and storage of the power tool.
Unintentional activation of the trigger can result in
injury.
Remove the battery pack
from the appliance.
Turn the appliance around.
Press the release
together (see fig. B).
Pull the magazine slider
backwards
(see fig. B).
Fill the magazine shaft
with staples or nails
(see fig. C).
NOTE
Ensure the correct position for the nails
(see main diagram, face plate
on the
appliance).
After filling, push the release
into the maga-
zine shaft
as far as the stop until it clicks into
place.
NOTE
The fill level indicator
shows whether the
magazine contains staples.
Setting the impact force
NOTE
Select the lowest impact force sufficient for
stapling. Take into account the length of the
staples or nails you are using as well as hard-
ness of the material you are working with.
Increasing the impact force:
Turn the impact force control
clockwise.
Reducing the impact force:
Turn the impact force control
anticlockwise.
Operation
Switch on
Press the tacker nose onto the location on
the material that you want to staple until it is
pushed in a few millimetres.
Press the trigger
.
Switching on the LED work light
Press the button for the LED work light to illu-
minate your workspace in unfavourable lighting
conditions.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 292298 PAT 20 Li A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 292298 PAT 20 Li A1 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info