Manual Parkside IAN 292200 PMTS 180 A1 (page 23 of 102) (English, German, Dutch, French, Portuguese, Spanish)

746844

Zoom out

Zoom in

1/102

PMTS 180 A1

■ 20

│

i) Wear personal protective equipment. De-

pending on the application, ensure that you

use full face protection, eye protection or

goggles. If required, use a dust mask, ear

protectors, protective gloves or special apron

to protect you from grindings and material

particles. The eye protection must be worn to

protect you against ﬂying debris, which may be

caused by the various applications. Dust or ﬁlter

masks must be used to ﬁlter any dust created

by the application. If you are exposed to loud

noise for any length of time, you can suﬀer a

hearing loss.

j) Ensure that other people remain at a safe dis-

tance to your workspace. Anyone who enters

the workspace must wear personal protective

equipment. Fragments of the workpiece or bro-

ken accessory tools can ﬂy oﬀ and cause injury

– even outside the immediate working area.

k) Keep the power cable away from any rotat-

ing accessories. If you lose control of the ap-

pliance, the connecting cable may get cut or

caught and your hand or arm could get caught

in the rotating accessory tool.

l) Clean the ventilation slits in your power tool

regularly. The engine fan draws dust into the

housing and a strong accumulation can cause

electrical hazards.

m) Do not use the power tool near ﬂammable

materials. Do not use the electrical appliance

if it is placed on a ﬂammable surface such as

wood. Sparks can ignite such materials.

n) Do not use any attachment parts that require

liquid coolant. The use of water or other liquid

coolants may lead to an electric shock.

2) Kickback and corresponding

safety instructions

Kickback is a sudden reaction caused when a

rotating cutting disc catches or jams. Catching or

jamming causes the rotating accessory tool to stop

abruptly. This results in an uncontrolled cutting

grinding tool being accelerated upwards towards

the operator.

If, for example, a cutting disc catches or jams, the

edge of the cutting disc that is projecting into the

workpiece can get caught and break oﬀ the cutting

disc or cause a kickback. This can also break cut-

ting discs.

A kickback is caused by improper or incorrect use

of the power tool. This can be avoided by taking

proper precautions as given below.

a) Hold the power tool ﬁrmly in both hands and

position your body and arms so that they

can absorb the kickback forces. By taking

adequate precautions, the operator can stay in

control of the kickback and reaction torques.

b) Avoid the area in front of and behind the

rotating cutting disc. In cases of kickback, an

uncontrolled cutting grinding tool is driven up-

wards towards the operator.

c) Do not use a toothed, wood-cutting or chain

saw blade or segmented diamond-coated

disc with more than 10 mm wide gaps. Such

accessories often cause a kickback or loss of

control over the power tool.

d) Avoid cutting disc jams or excessive contact

pressure. Do not make any excessively deep

cuts. Overloading the cutting disc increases the

stress and likelihood of tilting or blocking and

thus the possibility of a setback or a breakage

of the grinding tool.

e) If the cutting disc jams or you stop working,

switch the tool oﬀ and hold the cutting ap-

pliance steady until the disc has completely

stopped turning. Never attempt to pull a ro-

tating cutting disc out of a cut. This could lead

to a kickback. Identify and remove the cause of

the jam.

f) Do not switch the power tool back on for as

long as it is in the workpiece. Allow the cut-

ting disc to reach its full speed before you

carefully continue the cut. Otherwise, the disc

can jam, jump out of the workpiece or cause

kickback.

I want to order a set off carbon brushes for my parkside pmts 180 A1 cut-off grinder
IAN 292200 Submitted on 12-5-2022 at 18:43
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 292200 PMTS 180 A1 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 2,62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 292200 PMTS 180 A1 Manual

Product: