746865
23
Zoom out
Zoom in
Previous page
1/88
Next page
PDLS 5 A1
20 GBIE
Switching on:
To switch on, pull the trigger on the air paint
spray gun and keep it pressed in.
Switching off:
To stop working, simply release the trigger on
the air paint spray gun .
Setting the paint volume
You can regulate the paint quantity which is sprayed
using the paint volume regulating screw .
Work out the best settings by carrying out a
test.
Setting the paint jet pattern
The appliance has two settings: round jet and
broad jet.
Round jet Broad jet
Use the round jet for small surfaces, corners
and edges.
You can use the broad jet vertically or horizon-
tally for larger surfaces.
Turn the regulator until the desired spray
type has been set.
Work out the best settings by carrying out a
test.
Replacing the nozzle
Screw off the paint volume regulating screw
by turning it in an anticlockwise direction.
Remove the nozzle needle.
Unscrew the union nut together with the
nozzle head .
You can now unscrew the nozzle using a hex
key.
Reassemble the appliance in reverse order.
Maintenance
WARNING! RISK OF INJURY!
Disconnect the tool from the
compressed air supply.
Clean the appliance after every use.
WARNING – PROPERTY DAMAGE!
Never submerse the appliance completely in
cleansing agents, otherwise the seals can be
damaged.
Do not use any hydrocarbon-based solvents
like benzene, ethyl chloride, etc., as these
could trigger chemical reactions with some of
the materials in the air paint spray gun. This
can lead to dangerous reactions.
Rinse the air paint spray gun out using a
container filled with a suitable cleansing agent
at low pressure.
Collect the liquid in a container and dispose of
the liquid in an environmentally correct manner.
Oil the moving parts on the trigger of the air
paint spray gun .
If you remove the nozzle during cleaning you
must grease it afterwards. Do not use any
silicon-based lubricants.
Operating the air blow gun
Switching on:
To switch on, pull the trigger on the air blow
gun and keep it pressed in.
Switching off:
To stop working, simply release the trigger on
the air blow gun .
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 292169 PDLS 5 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 292169 PDLS 5 A1 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 4,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info