746865
21
Zoom out
Zoom in
Previous page
1/88
Next page
PDLS 5 A1
18 GBIE
Operation
Connecting the appliance
The product may only be operated using
cleaned, condensate- and oil-free compressed
air and may not exceed the maximum operating
pressure stated in the section entitled "Technical
data" on the appliance.
To ensure that you can regulate the air pressure,
the compressed air source should be equipped
with a (filter) pressure reducer.
You will need a flexible compressed air hose with
a quick-disconnect coupling and a suitable com-
pressed air source to operate this appliance. Fol-
low all the operating and safety instructions for the
compressed air source and any special instructions
regarding paint preparation.
NOTE
Take note of the correct working pressure.
Excessively high pressure leads to strong
dispersion and overly-rapid liquid evapora-
tion. The surfaces become rough and develop
poor adhesion properties. If, however, the
working pressure is too low, the paint will not
be adequately dispersed. This leads to wavy
surfaces and droplets.
Connect the compressed air hose with the quick
coupling to the compressed air connection
, , or on the relevant appliance. The
connection locks automatically.
Connect the compressed air connection to
the compressed air source.
Set the working pressure on the filter pressure
reducer of the compressed air source to the
working pressure stated in the section entitled
"Technical data".
Operating the air spray gun
Preparing the surface
Carefully cover a large area around the spray
surface. Any surface that is not masked could
become contaminated.
Ensure that the surface is clean, dry and free of
grease.
Polished surfaces should be lightly sanded and
the sanding dust removed.
Switching the air spray gun on and
off
Working methods:
When thinning, ensure that the spray material
and the thinners are suitable for each other.
Using an unsuitable thinner can lead to the
formation of lumps which, in turn, can block the
air spray gun.
Fill the suction cup with the spray material.
Screw the suction cup onto the air spray gun
by turning it anticlockwise.
Hold the air spray gun at a constant distance
from the object. The ideal spraying distance is
approx. 15 cm.
Work out the best settings by carrying out a test.
Do not switch the appliance on/off over the
spray surface, rather start/end the spraying
process approx. 10 cm from the spray surface.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 292169 PDLS 5 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 292169 PDLS 5 A1 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 4,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info