Manual Parkside IAN 292169 PDLS 5 A1 (page 20 of 88) (English, German, Dutch, French, Spanish)

746865

Zoom out

Zoom in

1/88

PDLS 5 A1 GB│IE │ 17 ■

Safety instructions for ﬁne spray

systems

■Keep your work area clean, well lit and free

of paint and solvents, cloths and other inﬂam-

mable materials. Possible risk of spontaneous

combustion. Have a fully functioning ﬁre extin-

guisher available at all times.

■Ensure adequate ventilation in the spray zone

and suﬃcient fresh air in the entire room.

Evaporation of ﬂammable solvents will cause

an explosive environment.

■Do not spray or clean with materials whose

ignition point is lower than 21°C. Use materi-

als based on water, non-volatile hydrocarbons

or similar materials. The evaporation of volatile

solvents will cause an explosive environment.

■Do not spray near ignition sources such as

static electric sparks, open ﬂames, ignition

ﬂames, hot items, motors, cigarettes and sparks

caused by plugging in/unplugging power

cables or by operating switches. These ignition

sources could ignite a ﬁre in the environment.

■Do not spray any material if you do not know

whether it is potentially dangerous. Unknown

materials could cause hazardous conditions.

■Wear additional personal protective equip-

ment such as suitable gloves and a protective

mask/respirator when spraying or handling

chemicals. Wearing appropriate protective

equipment for the conditions reduces your expo-

sure to dangerous substances.

■Do not spray yourself, other people or ani-

mals. Keep your hands and other body parts

out of the spray jet. If the spray jet pierces the

skin, seek medical assistance immediately. The

sprayed material can even penetrate through a

glove and into the skin and thus into your body.

■Do not treat such a penetration injury like a

normal cut. A high-pressure jet can inject tox-

ins into the body and cause serious injuries.

In the event of a chemical penetration of the

skin, seek medical assistance immediately.

■Be aware of the potential hazards of the

sprayed material. Take note of the markings

on the container and the manufacturer's infor-

mation on the sprayed material, including the

instructions to use personal protective equip-

ment. The manufacturer's instructions are to

be followed to reduce the risk of ﬁre or injuries

caused by poisons, carcinogens, etc.

■Never spray without the nozzle head ﬁtted.

Using a special nozzle with the appropriate noz-

zle head reduces the likelihood of high-pressure

jets piercing the skin and injecting poisons into

your body.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 292169 PDLS 5 A1 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 4,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 292169 PDLS 5 A1 Manual

Product: