Manual Parkside IAN 292166 PDWE 8 A1 (page 23 of 86) (English, German, Dutch, French, Spanish)

746863

Zoom out

Zoom in

1/86

GB/IE/NI 23

Table of contents

of oil.

 The integrated sight window permits continuous

overview of the filtered compressed air.

 To top up oil, turn the screw (B) down with

a suitable socket wrench. Fill the tank with a

matching hopper and tighten the screw again

with the wrench.

Troubleshooting

Faults Causes Solution

The lubrication

is not sufficient

The oil pas-

sage screw it

tightened too

far in direction

("–").

Increase

lubrication

(see above).

The com-

pressed air

volume is too

low, i.e. below

the minimum

fill level.

Pour more oil

into the oil

tank. Observe

the maximum

fill level.

The operating

pressure of the

compressed

air is too low.

The pressure

controller

is tightened

too far

(see above).

Increase the

pressure

(see above).

Cleaning and maintenance

Note:

The pneumatic maintenance unit must be

regularly serviced and overhauled for

proper function and for compliance with the safety

requirements. Improper and wrong operation may

cause failures and damage to the device.

 Never use any sharp and/or scraping cleaning

agents or solvents. They may damage the plas-

tic parts of the pneumatic maintenance unit.

 Make sure that no water can enter inside the

oiler.

 Ensure that the housing and the inside of the

pneumatic maintenance unit remains dust- and

dirt-free. For this, regularly rub the pneumatic

maintenance unit with a clean cloth.

 Clean the pneumatic maintenance unit and the

connections with a moist cloth at regular intervals.

 Drain the pneumatic maintenance unit's tank

at regular intervals. For this, press in the metal

pin at the bottom and let the condensate drain.

Note that the pneumatic maintenance unit must

be depressurised for safety.

Warranty and service

information

Warranty from Creative Marketing

Consulting GmbH

Dear Customer,

The warranty for this device is 3 years from the

date of purchase. In the event of product defects,

you have legal rights against the retailer of this

product. Your statutory rights are not affected in

any way by our warranty conditions, which are

described below.

 Warranty conditions

The warranty period begins on the date of pur-

chase. Please retain the original sales receipt. This

document is required as your proof of purchase.

Should this product show any defect in materials

or manufacture within 3 years from the date of

purchase, we will repair or replace it – at our

discretion – free of charge. To claim against this

warranty, you must present the defective device

and your purchase receipt within the 3-year period,

and include a brief written description of the nature

of the defect and the date it occurred. If the defect

is covered by our warranty, we will repair and

return your product or send you a replacement.

The original warranty period is not extended when

a device is repair or replaced.

 Extent of warranty

The device has been manufactured according to

strict quality guidelines and meticulously examined

... / Cleaning and maintenance / Warranty and service information

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 292166 PDWE 8 A1 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1,35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 292166 PDWE 8 A1 Manual

Product: