746863
19
Zoom out
Zoom in
Previous page
1/86
Next page
GB/IE/NI 19
Table of contents… / Safety notes for using pneumatic devices
Any changes to the pneumatic
maintenance unit exclude liability of
the manufacturer and any connected
damage.
Safety notes for using
pneumatic devices
Important!
Always keep the compressed air
hose firmly in your hands when
releasing a connection. The lash
-
ing backlash of the compressed
air hose may cause injury.
The compressed air maintenance
unit must be installed before it can
be safely taken into operation. A
stable wall is suitable for installa
-
tion (with screw connections).
We recommend only using
the lubricants specified by the
manufacturer.
Never exceed the indicated
maximum pressure values of the
maintenance unit.
The pneumatic maintenance unit
must only be connected to a com
-
pressed air source that does not
exceed the working pressure of
8 bar.
Do not put the compressed air
lines near any heat, oils, heat and
sharp edges.
The maintenance unit must only
be operated in connection with a
pneumatic compressor.
Use of other compressed air
sources, such as a compressed air
cylinder, is forbidden. There is a
danger of fire and/or explosion.
Make sure that children and
persons with limited physical or
mental capacities are kept away
from the maintenance unit and the
connected compressed air tools.
Only use genuine spare parts for
repairs. Any non-genuine spare
parts may cause severe damage.
When conducting any mainte-
nance, setting and repair work,
always disconnect the mainte
-
nance unit from the compressed
air supply first.
Changes to the maintenance unit
are forbidden.
Use the maintenance unit only
when it is in an impeccable con
-
dition. In doubt, use a specialist's
advice.
Have repairs only conducted by
qualified specialists.
User safety
Try out the pneumatic tool
used before every use. Never
use the compressed air maintenance
unit with any higher operating pres
-
sure then indicated in the technical
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 292166 PDWE 8 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 292166 PDWE 8 A1 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info