Manual Parkside IAN 291875 PSTDA 20 Li A2 (page 23 of 99) (English, German, Dutch, French, Portuguese, Spanish)

746773

Zoom out

Zoom in

1/99

PSTDA 20-Li A2

│

IE│ 19■

Attaching/disconnecting the battery

pack to/from the appliance

Inserting the battery pack:

♦ Allow the battery pack

to click into place in

the appliance.

Removing the battery pack:

♦ Press the release button

and remove the

battery pack.

Checking the battery charge level

♦ Press the battery charge level button to check

the status of the battery (see also main diagram).

The status will be shown on the battery display

LED as follows:

♦ RED/ORANGE/GREEN = maximum charge

RED/ORANGE = medium charge

RED = low charge – charge the battery

Initial operation

Fitting/changing the saw blade

Remove the battery before carrying out any work

on the power tool (e.g. maintenance, changing

tools, etc.) as well as during the transport and

storage of the power tool.

Unintentional activation of the ON/OFF switch

can result in injury.

♦ Press the blade guard together

at the height

of the outer catches and pull it oﬀ to the front.

♦ Turn the quick-release chuck

and hold it

in this position.

♦ Push the required saw blade into the quick-

release chuck

as far as the stop.

♦ Release the quick-release chuck

so that it

returns to its initial position. The saw blade is

now locked.

■ CAUTION! The saw blade teeth must face the

front (see fold-out page)!

Fitting the blade guard

Fit the blade guard before you connect the

appliance to a dust extractor.

♦ Fit the blade guard

onto the appliance

so that the two outer catches engage in the

recesses in the housing.

♦ Remove the blade guard

for working without

a dust extractor or when making mitre cuts.

To do this, press the blade guard together

at the height of the outer catches and pull it

oﬀ to the front.

Fitting the rip fence

The rip fence can be ﬁtted on the left or right

of the appliance.

♦ Undo both the clamping screws on the insertion

openings

♦ Push the rip fence

into the insertion openings

♦ Retighten the two locking screws.

Connecting the sawdust extractor

♦ Push the extraction nozzle into the vacuum

extraction duct until it is secured in place.

Optional, depending on the diameter of the

dust and sawdust extractor.

♦ Attach an approved dust and sawdust extractor

to the extraction nozzle

■

Wear a dust mask.

Supporting the extraction function:

♦ Press the sawdust blower switch

to the "O"

position.

Sawdust blowing function

Switching the sawdust blowing function on:

♦ Press the sawdust blower switch

to the

position.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 291875 PSTDA 20 Li A2 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,14 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 291875 PSTDA 20 Li A2 Manual

Product: