746631
23
Zoom out
Zoom in
Previous page
1/100
Next page
2 3
I EG B
Mounting the sanding table:
3. To mount the sanding table (11), push
the sanding table holder (10) back onto
the device.
4. Insert the screw (9) with washer (8) and
tighten.
Ensure the 4 lugs are correctly
positioned (see illustration
)
otherwise screw (
9) will not screw
in.
Adhering/replacing
sanding paper
DoNOTremovethewhitelm
from the sanding disc!
Caution! Risk of injury! Discon-
nect the device from the power sup-
ply to prevent unintentional starting.

dismount the sanding table (11)
and holder (10) (see “Dismounting/
mounting the sanding table”).
1 
-
verse side of the sanding paper (18).
When re-using it, remove the sanding
181
2. Stick the sanding paper (18) centrally
onto the sanding disc (1) while ensuring
there are no bubbles.
Trial run:
Perform a trial run at top speed without a
load for at least 1 minute whenever you
change the sanding paper. Remain outside
the hazard area while doing so.
The sanding paper (18) can be
re-used provided you stick it onto
1
provided when being stored.
Setting the sanding
table angle
The angle of the sanding table (11) can be ad-
justed continuously between -10° and +50°.
1. Release the screws (7).
2. Set the desired angle using the angle
scale (6).
3. Tighten the screws (7).
Using an angle stop
1. Release the angle stop screw (13b) and
set the desired angle using the scale
onto the rail marking (13a).
2. Fix the angle stop (13) in place by tigh-
tening the screw (13b).
3. Slide the rail of the angle stop (13a) into
the slot (12) on the sanding table (11).
Connecting external
dust extraction
Please check the operating manual
of your vacuum cleaner to ascertain
whether it is suitable for the suction
of grinding chips.
Connecting external dust extrac-
tion:
1. Place the angle adapter (14) into the
opening on the device.
Ensure that you slide the lug on the
angle adapter (14) into one of the two
slots in the device opening (see de-
tailed illustrations).
2. Rotate the angle adapter (14) into a
vertical or horizontal position to secure
the angle adapter (14) against falling
out.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 290842 PTSG 140 B2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 290842 PTSG 140 B2 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 2,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info