746631
21
Zoom out
Zoom in
Previous page
1/100
Next page
2 1
I EG B
unless otherwise indicated in the inst-
ructions.
- Damaged switches must be replaced
at a customer service workshop.
- Do not use power tools if the switch
cannot be turned on and off.
• CAUTION! The use of other bits and
other accessories can result in a risk of
personal injury.
Have your power tool be re-
pairedbyaqualiedelectrician
- This power tool complies with the
relevant safety regulations. Repairs

electrician, using original spare parts;
otherwise accidents involving the user
may result.
Service:
Have your power tool repaired
onlybyqualiedspecialistsand
only with original spare parts.
This will ensure that the power tool re-
mains safe.
Safety instructions for disc
sander
Caution! Risk of injury! Wear
personal protective
equipment.
Wear safety goggles, hearing
protection, a dust mask and gloves.
When working under dust-prone condi-
tions, ensure ventilation holes are clear.
Disconnect the device from the power
supply prior to cleaning.
Caution, risk of injury! The sanding disc
will continue to run for a short time af-
ter switching off the machine.
Never make the warning labels on the
power tool illegible.
Attach the power tool to a so-
lid,atandhorizontalsurface.
If the power tool is prone to slipping
or wobbling, the bit cannot be guided
smoothly and safely.
The bit should only be moved
against the workpiece when the
device is turned on. Otherwise
there is a danger of the bit becoming
jammed in the workpiece and the work-
piece rotating with the bit. This can
lead to injuries.
Switch the power tool off imme-
diately if the bit jams.
The bit jams when:
Das Einsatzwerkzeug blockiert, wenn:
- The power tool is overloaded;
- It becomes stuck in the workpiece
being machined.
Set the correct speed before st-
arting work.
After completing your work, do
not touch the sanding disc until
it has cooled down. The bit beco-
mes very hot during use.
Inspect the cable regularly and
have a damaged cable repaired
only by an authorised customer
service centre. Replace dama-
ged extension cables. This will en-
sure that the power tool remains safe.
Store the power tool safely
when not in use. The storage
place must be dry and lockable.
This prevents the power tool from being
damaged as a result of being stored or
operated by inexperienced people.
Never leave the tool before it
has come to a complete stand-
still. Bits still in motion can cause injury.
Do not use the power tool with
a damaged cable. Do not touch
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 290842 PTSG 140 B2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 290842 PTSG 140 B2 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 2,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info