748038
17
Zoom out
Zoom in
Previous page
1/92
Next page
PTSS 1200 B1
14 
GB
IE
PLUNGE SAW PTSS 1200 B1
Introduction
Congratulations on the purchase of your new appli-
ance. You have selected a highquality product. The
operating instructions are part of this product. They
contain important information on safety, usage and
disposal. Before using the product, familiarise your-
self with all operating and safety instructions. Use
the product only as described and for the specified
areas of application. Please also pass on these
operating instructions to any future owner.
Intended use
This circular saw (hereinafter "appliance" or "ma-
chine") is designed for longitudinal, cross and
plunge cuts in firmly supported solid wood, chip
board, plastics and lightweight construction mate-
rials. Working with metals is not permitted. This ap-
pliance can be used with the provided guide rails
– exclusively for the cutting techniques described.
Any other uses of or modification to the appliance
is deemed to be improper and carries the risk of
serious personal injury. Not for commercial use.
Features
Safety lock-out
ON/OFF switch
Handle
Hex key (small)
Hex key (large)
Motor unit
Chip ejector adapter
Fine adjustment screws for 0° cutting angle
8a
Fine adjustment screw for 45° cutting angle
Baseplate
9a
Markings for cutting line
Eccentric screw (2 x)
Adjustment wheel for cutting
angle adjustment (2 x)
Cutting depth adjustment
Cutting depth scale
Saw blade
14a
Clamping screw/plain washer
14b
Panel cut out
Additional handle
Cutting width marking
Chip ejector (rotatable)
Clamping lever for changing saw blades
Spindle lock
Groove for guide rails
Guide rail
Grub screws
Connector
X flange (factory-fitted)
Package contents
1 circular saw
1 saw blade 165mm / 24 teeth (pre-fitted)
2 guide rails
1 connector
1 chip ejector adapter
2 Hex keys
1 set of operating instructions
Technical data
Rated voltage: 230 V
~
50 Hz
(Alternating current)
Nominal power input: 1200 W
Idle speed: n
0
= 5200 rpm
Sawblade mount: ø 20 mm
Saw blade:
165mm
165 mm
Main blade width: 1.5 mm
Tooth thickness: 2.6 mm
Max. cutting depth: 56 mm at a 90°
mitre angle
42 mm at a 45°
mitre angle
5 mm less with guide rails
Protection class: II / (Double insulation)
Accessories: Guide rails 2 x
700mm x 180 mm
max. 65 mm
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 290795 PTSS 1200 B1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 290795 PTSS 1200 B1 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info