748019

Parkside IAN 289754 20 V PAMFWP 20 Li A1 Manual

25
Zoom out
Zoom in
Previous page
1/88
Next page
26 GB/IE
Insert the insertion tool in the tool holder.
Note: You can attach the insertion tools in the
tool holder in any lock-in position.
Tighten the tool by pushing the lever
1
down
again.
Check the insertion tool is firmly seated.
Incorrectly or not securely attached insertion
tools can release during use, causing injuries.
Initial use
On / Off switch
Switching on:
Slide the ON / OFF switch forward to switch
on the tool.
The LED light
11
comes on when switched on
and lights up the work area in poor lighting
conditions.
Note: The LED light
11
will stay on for an
additional approx. 10 seconds after switching
off the tool (ON/OFF switch
2
released).
Switching off:
Slide the ON/OFF switch
2
back to switch
off the tool.
Setting The Oscillation Speed
Use the oscillation speed adjustment wheel
7
to set the oscillation speed.
Setting 1: low oscillation speed
Setting 6: high oscillation speed
Note: The oscillation speed required
varies by material and working conditions and
can be determined with tests.
Cleaning and maintenance
RISK OF INJURY!
Always switch the tool off and remove the
battery before working on the tool.
Do not use sharp objects to clean the tool.
Never allow any liquids to enter the tool. The
tool may otherwise be damaged.
Routinely clean the tool, preferably promptly
after use.
Clean the housing with a dry cloth. Never use
petrol, solvents, or cleaning agents which
damage plastic.
Use a vacuum to deep clean the tool.
The vents must always be clear.
Use a brush to remove dust clinging to the tool.
When storing a lithium-ion rechargeable
battery for extended periods, regularly check
the battery charge. The optimal battery charge
is between 50 % and 80 %. The optimal
storage conditions are cool and dry.
Disposal
The packaging is made entirely of
recyclable materials, which you may
dispose of at local recycling facilities. The
Green Dot is not valid for Germany.
b
a
Observe the marking of the packaging
materials for waste separation, which
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics / 20–22: paper and
fibreboard / 80–98: composite
materials.
The product and packaging materials are
recyclable, dispose of it separately for
better waste treatment. The Triman logo
is valid in France only.
Contact your local refuse disposal
authority for more details of how to
dispose of your worn-out product.
To help protect the environment, please
dispose of the product properly when it
has reached the end of its useful life and
not in the household waste. Information
on collection points and their opening
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 289754 20 V PAMFWP 20 Li A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 289754 20 V PAMFWP 20 Li A1 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 2,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info