746595
18
Zoom out
Zoom in
Previous page
1/76
Next page
PPS 200 A1
GB
IE
 15
WARNING! TOXIC DUST!
Dusts from materials such as leaded paint,
some types of wood and metal can be harm-
ful to your health.
Contact with or inhalation of these dusts can
represent a health hazard for the person
operating the appliance and other people in
the vicinity.
WARNING!
RISKS DUE TO DUST!
When working for extended periods of time
on wood and, in particular, materials that
produce dust which is hazardous to health,
connect the appliance to an appropriate ex-
ternal dust extraction appliance. Wear safety
goggles and a protective dust mask!
Provide sufficient ventilation when working on
plastics, paints, lacquers, etc.
Do not soak the materials or the area to be
processed with liquids containing solvents.
Avoid sanding lead paint or other harmful
materials.
Materials containing asbestos must not be
processed.Asbestos is a known carcinogen.
The device is designed for the dry surface
sanding of wood, plastic, metal and plaster
and painted surfaces.
Never work on moistened materials or damp
surfaces. Water entering a power tool will
increase the risk of electric shock.
Always hold the appliance firmly with two
hands while working.
Do not rest your hands next to or in front of
the appliance and the area being worked as
there is a risk of injury if you slip.
Always switch the appliance off and allow
the sanding sheet
to stop oscillating before
putting the appliance down.
Always remove the plug from the power
socket during work breaks, when adjusting
the appliance (e.g. changing the sanding
sheet) and when it is no longer in use.
The appliance must always be kept clean, dry
and free from oil or grease.
Original accessories/auxiliary
equipment
Use only the additional equipment and acces-
sories specified in the operating instructions.
Using attachments or accessory tools other than
those recommended in the operating instruc-
tions can lead to a risk of injury.
Operation
Switching on and off
Switching on:
Press the ON/OFF switch
to position "I".
Switching off:
Press the ON/OFF switch
to position "0".
Fitting the sanding sheet
WARNING!
Always remove the plug from the mains
power socket before carrying out any work
on the appliance.
NOTE
Before fitting a new sanding sheet
, remove
any dust and dirt from the sanding plate ,
and .
Ensure that the extraction holes on the sanding
sheet match up with those on the sander plate.
Position the sanding sheet
flush on one side
of the sanding pad , and .
Then place the sanding sheet
on the sanding
pad , and and press it firmly into
place.
Different materials require different grain sizes. You
can find out which grain is suitable for which work
in our non-binding recommendations in "Work
instructions, tips and tricks".
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 289615 PPS 200 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 289615 PPS 200 A1 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info