746595
15
Zoom out
Zoom in
Previous page
1/76
Next page
PPS 200 A1
12 
GB
IE
POWER SANDER PPS 200 A1
Introduction
Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.
Intended use
This appliance is intended for the dry sanding of
wood, metal and paintwork. Any other uses of the
appliance are considered improper and carry the
risk of serious personal injury. The manufacturer
accepts no responsibility for damage(s) attribut-
able to misuse. This appliance is not intended for
commercial use.
Features
Grip
Release button
Dust collector
Nozzle (suction)
Adapter for external vacuum extraction
Sanding plate (rectangular)
Sanding sheet
Sanding plate (triangle bottom)
Sanding plate (triangle top)
ON/OFF switch
Package contents
1 Power sander PPS 200 A1
3 Sanding sheets (120 grain)
1 dust collector
1 adapter for external vacuum extraction
1 set of operating instructions
Technical data
Nominal voltage: 230 V ∼ 50 Hz
(AC)
Nominal power input: 200 W
Nominal speed: n
0
14000 rpm
Nominal
oscillation speed: n
0
28000 rpm
Sanding sheet
dimensions: rectangular
114 x 102 mm
Triangle
93 x 93 x 93 mm
Protection class: II /
(Double insulation)
Noise and vibration data:
Noise measurement value determined in accordance
with EN 60745. The A-rated noise level of the
power tool is typically as follows:
Sound pressure level L
PA
: 78.5 dB (A)
Sound power level L
WA
: 89.5 dB (A)
Uncertainty K: 3 dB
Wear hearing protection!
Vibration values (vector total of three directions)
determined in accordance with EN 60745:
Vibration emission value a
h
= 5.71m/s
2
Uncertainty K = 1.5 m/s
2
NOTE
The vibration level specified in these instruc-
tions has been measured in accordance
with the standardised measuring procedure
specified in EN 60745 and can be used to
make equipment comparisons. The specified
vibration emission value can also be used to
make an initial exposure estimate.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 289615 PPS 200 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 289615 PPS 200 A1 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info