747886
19
Zoom out
Zoom in
Previous page
1/75
Next page
PSTK 800 B2
GB
IE
 15
After completing your work, switch the electric
tool off and do not pull the saw blade
out
of the cut until the tool has come to a standstill.
This avoids kickbacks, and allows you to put
the tool down safely.
Only use undamaged saw blades that are in
perfect working order. Bent and blunt saw blades
can break or cause a kickback.
Do not try and slow the saw blade
down
after switching off by applying lateral pressure.
The saw blade can be damaged, break or
cause a kickback.
Immobilise the workpiece securely. Use clamps/
vices to hold the workpiece firmly. This is much
safer than simply holding it in your hand.
Always run the power cord away from the
appliance to the rear.
Never work on moistened materials or wet
surfaces.
Hazards caused by dust! When working for
extended periods on wood and, in particular,
materials that produce dusts that are hazardous
to health, connect the appliance to an appropri-
ate dust extraction appliance.
Wear a dust mask.
Ensure there is sufficient ventilation.
WARNING! Protect yourself from
laser radiation!
LASER
2
P max.: < 1 mW λ: 650 nm EN 60825-1:2014
Never look directly into the laser beam or into
the laser discharge opening
from which it
emerges.
WARNING!
Looking at a laser beam through optical
instruments (e.g. magnifying glasses etc.)
can cause eye injuries.
Caution! If operating and adjustment equip-
ment is used or procedures other than those
specified here are carried out, this may result
in hazardous radiation exposure.
Never aim the laser beam at reflective surfaces,
people or animals. Even brief visual contact
with a laser beam can result in eye injuries.
Original accessories/additional
equipment
Only use the accessories and additional
equipment that are specified in the operat-
ing instructions and are compatible with
the appliance.
Information on saw blades
The Parkside basic equipment includes saw blades
for use with wood and metal.
3 saw blades for general wood cuts
1 saw blade for light metals up to 3 mm
NOTE
You can also use any other saw blades pro-
vided they are fitted with a suitable mounting
(single-lug shank).
Saw blade type
suitable unsuitable
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 289281 PSTK 800 B2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 289281 PSTK 800 B2 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info